[Tue May 15 15:09:59 2012] Detection parameters:
  Position = (274.2, 289.4) = 7 44 57.11 39 27 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.0 +/- 15.0
  Background counts = 53.5
  Rate = 0.001 +/- 0.0003

[Tue May 15 15:10:00 2012] Off-axis axis estimate = 1.87'
[Tue May 15 16:32:27 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue May 15 16:32:27 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue May 15 16:32:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Tue May 15 16:32:27 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.37"
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28.ximg exists
[Tue May 15 17:41:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28.csv
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May 15 17:41:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28.csv
[Tue May 15 17:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May 15 17:41:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May 15 17:41:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 15 17:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 19:03:31 2012] Source 14 is offset by -6.424359 and -6.109717 pixels which is larger than
2 X fitted extent = 0.926235 x 0.926235, not incorporating fit results
[Tue May 15 19:03:31 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:31 2012] Assessing source extent using major
[Tue May 15 19:03:31 2012] Source does appear to be extended
[Tue May 15 19:03:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 20:15:50 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue May 15 20:15:50 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue May 15 20:15:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Tue May 15 20:15:50 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.37"
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src25.ximg exists
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue May 15 21:13:31 2012] Fit fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src25 appears to have run properly
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue May 15 21:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 15 21:13:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 22:28:47 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.403638 pixels away
[Tue May 15 22:28:47 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:47 2012] Assessing source extent using major
[Tue May 15 22:28:47 2012] Source does appear to be extended
[Tue May 15 22:28:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 23:35:39 2012] XMMSAS src. selection expression = ellipse(23807.126740, 25130.852661, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing source region out to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14_src.reg
[Tue May 15 23:35:39 2012] Extracting stamp from image fullrun_mos1_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (237, 252) - (312, 327)
[Tue May 15 23:35:39 2012] XMMSAS bgd. selection expression = annulus(23807.126740, 25130.852661, 1087.500000, 2175.000000, X, Y) && !ellipse(24816.509960, 25565.394200, 825.256024, 825.256024, 0.000000, X, Y) && !ellipse(25913.624400, 23491.551800, 375.278411, 375.278411, 0.000000, X, Y) && !ellipse(24348.465973, 24238.452179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25211.127472, 24255.433746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24896.252200, 26448.622000, 1119.760032, 1119.760032, 0.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14.gif
[Tue May 15 23:51:30 2012] Mean detx,y = (-1021.55, 685.99) 
[Tue May 15 23:51:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 23:51:43 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 23:51:44 2012] Setting source spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 15 23:51:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed May 16 00:24:19 2012] Not generating rmf since there are only 61 counts
[Wed May 16 00:24:19 2012] rmf not generated due to insufficient counts
[Wed May 16 01:17:08 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:09 2012] Error reading totcts from fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed May 16 01:17:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:10 2012] Using photon index=1.80, rate=0.00115, arf fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src14.arf
[Wed May 16 01:17:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:10 2012] Updating source flux to 1.1e-14
[Wed May 16 01:17:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting