[Tue May 15 15:09:59 2012] Detection parameters:
  Position = (432.4, 300.7) = 7 43 57.68 39 27 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.4 +/- 12.9
  Background counts = 38.0
  Rate = 0.001 +/- 0.0002

[Tue May 15 15:10:00 2012] Off-axis axis estimate = 9.71'
[Tue May 15 16:32:27 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue May 15 16:32:27 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Tue May 15 16:32:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.914
[Tue May 15 16:32:27 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.29"
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21.csv
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue May 15 17:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21.csv
[Tue May 15 17:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue May 15 17:41:00 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue May 15 17:41:00 2012] Fit fullrun_mos1_xmm0551850101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue May 15 19:03:31 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.163822 pixels away
[Tue May 15 19:03:31 2012] Vigneting correction estimate = 1.000000
[Tue May 15 19:03:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 19:03:31 2012] Assessing source extent using major
[Tue May 15 19:03:31 2012] Source does appear to be extended
[Tue May 15 19:03:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 20:15:50 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue May 15 20:15:50 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Tue May 15 20:15:50 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.914
[Tue May 15 20:15:50 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.29"
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src20.ximg exists
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue May 15 21:13:31 2012] Fit fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_src20 appears to have run properly
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue May 15 21:13:31 2012] fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue May 15 21:13:31 2012] Fit fullrun_mos1_xmm0551850101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue May 15 22:28:47 2012] Source 12 is offset by -9.970994 and 0.291199 pixels which is larger than
2 X fitted extent = 1.297218 x 1.297218, not incorporating fit results
[Tue May 15 22:28:47 2012] Vigneting correction estimate = 1.000000
[Tue May 15 22:28:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 15 22:28:47 2012] Assessing source extent using major
[Tue May 15 22:28:47 2012] Source does appear to be extended
[Tue May 15 22:28:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 23:35:39 2012] XMMSAS src. selection expression = ellipse(37570.737549, 26110.693878, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing source region out to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12_src.reg
[Tue May 15 23:35:39 2012] Extracting stamp from image fullrun_mos1_xmm0551850101_pi300-10000_cl_sm2.00.img.gz, (395, 263) - (470, 338)
[Tue May 15 23:35:39 2012] XMMSAS bgd. selection expression = annulus(37570.737549, 26110.693878, 1087.500000, 2175.000000, X, Y)
[Tue May 15 23:35:39 2012] Writing fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12.gif
[Tue May 15 23:48:45 2012] Mean detx,y = (372.28, -12889.17) 
[Tue May 15 23:48:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 23:49:19 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 23:49:19 2012] Setting source spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 15 23:49:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed May 16 00:16:03 2012] Not generating rmf since there are only 77 counts
[Wed May 16 00:16:03 2012] rmf not generated due to insufficient counts
[Wed May 16 01:17:08 2012] Updating aperture counts using extracted products
[Wed May 16 01:17:08 2012] Error reading totcts from fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 16 01:17:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 01:17:09 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0551850101_pi300-10000_pass1_cl_src12.arf
[Wed May 16 01:17:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 01:17:09 2012] Updating source flux to 3.8e-14
[Wed May 16 01:17:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting