[Tue May  1 11:39:15 2012] Detection parameters:
  Position = (216.1, 367.0) = 14 1 27.81 2 56 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4022.8 +/- 79.8
  Background counts = 269.6
  Rate = 0.04 +/- 0.0007

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 7.77'
[Tue May  1 11:50:41 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Tue May  1 11:50:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.092
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.31"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May  1 20:18:13 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May  2 03:25:44 2012] Spatial fit model total counts = 4117.440000, observed total counts = 3883.000000
[Wed May  2 03:25:44 2012] Offset between fit and detection position for source 7 = 0.039845 pixels
[Wed May  2 03:25:44 2012] 4109.320000 total counts/ 1860.910000 bgd. counts: snr = 52.121010
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.039845 pixels
  Position = (216.0, 366.9) = 14 1 27.81 2 56 4.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2248.4 +/- 64.1
  Background counts = 1860.9
  Rate = 0.03 +/- 0.0009
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:26:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 5.53"
[Wed May  2 03:26:42 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.275
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.53"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May  3 03:10:41 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu May  3 08:04:25 2012] Spatial fit model total counts = 4117.440000, observed total counts = 3883.000000
[Thu May  3 08:04:25 2012] Offset between fit and detection position for source 7 = 0.000046 pixels
[Thu May  3 08:04:25 2012] 4109.330000 total counts/ 1860.940000 bgd. counts: snr = 52.120126
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000046 pixels
  Position = (216.0, 366.9) = 14 1 27.81 2 56 4.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2248.4 +/- 64.1
  Background counts = 1860.9
  Rate = 0.03 +/- 0.0009
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] Counts = 2248.390000, rescaling region sizes by 2.000000
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(18747.529620, 31873.970400, 663.559219, 663.559219, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (178, 329) - (254, 405)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(18747.529620, 31873.970400, 2211.864064, 4423.728127, X, Y) && !ellipse(26434.526000, 27800.076200, 3773.568109, 3773.568109, 0.000000, X, Y) && !ellipse(13533.741776, 28824.364807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13546.653183, 32457.836121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20190.291000, 30282.069400, 422.249612, 422.249612, 0.000000, X, Y) && !ellipse(23745.819458, 27304.156097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17434.701981, 27453.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.299316, 27014.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.285370, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7.gif
[Thu May  3 09:13:23 2012] Mean detx,y = (-5488.41, -6723.23) 
[Thu May  3 09:13:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 09:14:26 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 09:14:26 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May  3 09:14:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May  5 21:04:12 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:12 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May  5 21:04:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:18 2012] Using photon index=1.80, rate=0.0329, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src7.arf
[Sat May  5 21:04:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:18 2012] Updating source flux to 1.4e-13