[Tue May  1 11:39:15 2012] Detection parameters:
  Position = (156.1, 331.9) = 14 1 45.21 2 53 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2190.0 +/- 61.5
  Background counts = 252.2
  Rate = 0.02 +/- 0.0006

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 10.60'
[Tue May  1 11:50:41 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Tue May  1 11:50:41 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.73"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May  1 20:18:13 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May  2 03:25:44 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.077786 pixels away
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:26:42 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Wed May  2 03:26:42 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.73"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  3 03:10:41 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May  3 08:04:25 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.145878 pixels away
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] Counts = 2190.026611, rescaling region sizes by 2.000000
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(13533.741776, 28824.364807, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (81, 257) - (231, 407)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(13533.741776, 28824.364807, 4350.000000, 8700.000000, X, Y) && !ellipse(18747.529620, 31873.970400, 442.372813, 442.372813, 0.000000, X, Y) && !ellipse(9700.626862, 35896.027374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12060.608063, 22829.744080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22489.860860, 22550.170400, 430.827212, 430.827212, 0.000000, X, Y) && !ellipse(15846.681168, 19855.705048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13546.653183, 32457.836121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20190.291000, 30282.069400, 422.249612, 422.249612, 0.000000, X, Y) && !ellipse(9593.155258, 29259.723236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19396.248245, 25458.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12011.196640, 25287.799408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18509.505630, 23297.746094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14648.244751, 37772.811829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17434.701981, 27453.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19367.050000, 20180.700000, 1580.512045, 1580.512045, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5.gif
[Thu May  3 09:01:28 2012] Mean detx,y = (-11502.39, -5811.40) 
[Thu May  3 09:01:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 09:07:04 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 09:07:04 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  3 09:07:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May  4 22:47:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 22:47:33 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:10 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:10 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May  5 21:04:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:18 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src5.arf
[Sat May  5 21:04:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:18 2012] Updating source flux to 1.1e-13
[Sat May  5 21:13:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting