[Tue May  1 11:39:15 2012] Detection parameters:
  Position = (304.8, 320.0) = 14 1 2.03 2 52 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150955.3 +/- 462.7
  Background counts = 382.8
  Rate = 2 +/- 0.005

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 1.63'
[Tue May  1 11:50:41 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue May  1 11:50:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.25"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:12 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May  1 20:18:12 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May  1 20:18:12 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May  2 03:25:44 2012] Spatial fit model total counts = 38996.100000, observed total counts = 64517.000000
[Wed May  2 03:25:44 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  2 03:25:44 2012] Spatial fit model total counts = 198774.000000, observed total counts = 202103.000000
[Wed May  2 03:25:44 2012] Offset between fit and detection position for source 3 = 0.342250 pixels
[Wed May  2 03:25:44 2012] 196895.000000 total counts/ 25600.000000 bgd. counts: snr = 1070.593750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.342250 pixels
  Position = (304.5, 320.1) = 14 1 2.13 2 52 40.7
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 171295.0 +/- 443.7
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:25:45 2012] Source is confused with source 2
[Wed May  2 03:26:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Wed May  2 03:26:42 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.954
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.49"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  3 03:10:41 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May  3 08:04:25 2012] Spatial fit model total counts = 229288.000000, observed total counts = 232971.000000
[Thu May  3 08:04:25 2012] Offset between fit and detection position for source 3 = 0.093054 pixels
[Thu May  3 08:04:25 2012] 224804.000000 total counts/ 40000.000000 bgd. counts: snr = 924.020000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.093054 pixels
  Position = (304.4, 320.1) = 14 1 2.16 2 52 40.9
  Extent = 15.7 (15.6-15.8)", rotation angle = 0
  Source counts = 184804.0 +/- 474.1
  Background counts = 40000.0
  Rate = 3 +/- 0.007
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] Counts = 184804.000000, rescaling region sizes by 3.000000
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(26434.526000, 27800.076200, 2830.176081, 2830.176081, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (142, 157) - (467, 483)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(26434.526000, 27800.076200, 14150.880407, 28301.760814, X, Y) && !ellipse(21793.293200, 17151.800400, 493.016814, 493.016814, 0.000000, X, Y) && !ellipse(26883.618000, 26535.454000, 3303.672095, 3303.672095, 128.207000, X, Y) && !ellipse(25940.575531, 29121.056366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13533.741776, 28824.364807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.626892, 27611.019073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18747.529620, 31873.970400, 442.372813, 442.372813, 0.000000, X, Y) && !ellipse(9700.626862, 35896.027374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.863800, 12911.254227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.772980, 30464.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.586426, 29509.529633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.236000, 27591.814400, 1240.528036, 1240.528036, 0.000000, X, Y) && !ellipse(31858.080933, 14557.421509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12060.608063, 22829.744080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22489.860860, 22550.170400, 430.827212, 430.827212, 0.000000, X, Y) && !ellipse(15846.681168, 19855.705048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13067.043381, 18041.585922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19470.307600, 16971.804400, 360.915210, 360.915210, 0.000000, X, Y) && !ellipse(33460.137760, 16578.112600, 441.596813, 441.596813, 0.000000, X, Y) && !ellipse(29119.006200, 37869.517600, 435.285613, 435.285613, 0.000000, X, Y) && !ellipse(31408.188873, 33301.641602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.407318, 33332.540833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.599091, 32750.800018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39311.786285, 32570.993469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13546.653183, 32457.836121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.103271, 30295.195282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20190.291000, 30282.069400, 422.249612, 422.249612, 0.000000, X, Y) && !ellipse(9593.155258, 29259.723236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30638.317993, 28653.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.819458, 27304.156097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.997345, 26307.797943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.502000, 25739.295400, 654.860819, 367.032811, 339.057100, X, Y) && !ellipse(19396.248245, 25458.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12011.196640, 25287.799408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18509.505630, 23297.746094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16193.013809, 14793.630173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17871.768921, 19163.805740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22132.104599, 18826.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29048.133331, 17458.834869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.370300, 16936.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14648.244751, 37772.811829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.892517, 37221.885284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27670.470490, 36860.915466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.327820, 36696.680664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35046.338348, 34443.439606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.540000, 31879.540000, 1390.080040, 1390.080040, 0.000000, X, Y) && !ellipse(26132.828857, 31603.965424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.306946, 31166.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.796661, 31088.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.799805, 31252.856384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.872000, 29985.666000, 1353.664039, 1353.664039, 0.000000, X, Y) && !ellipse(24111.276276, 30401.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29585.524536, 29716.550232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17434.701981, 27453.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.299316, 27014.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.285370, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.488000, 26239.702000, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(23266.663666, 26399.035370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.298920, 25251.229034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.767975, 25703.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28820.817688, 24852.180786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36048.999542, 24726.366913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.524841, 24496.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.194000, 24497.794000, 1218.152035, 1218.152035, 0.000000, X, Y) && !ellipse(25050.376068, 24113.615356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.986420, 23892.480621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.014670, 22956.485701, 570.392490, 384.459510, 18.300977, X, Y) && !ellipse(31061.346200, 21825.767200, 367.347211, 367.347211, 0.000000, X, Y) && !ellipse(28550.308000, 22224.476000, 1358.472039, 1358.472039, 0.000000, X, Y) && !ellipse(29094.993960, 21085.606699, 485.825172, 429.846372, 280.015117, X, Y) && !ellipse(19367.050000, 20180.700000, 1580.512045, 1580.512045, 0.000000, X, Y) && !ellipse(29327.050000, 20471.658000, 1488.976043, 1488.976043, 0.000000, X, Y) && !ellipse(29727.046000, 19457.416000, 1522.592044, 1522.592044, 0.000000, X, Y) && !ellipse(18207.411087, 18076.175644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30957.404724, 16905.408615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.547600, 15020.588000, 1541.664044, 1541.664044, 0.000000, X, Y) && !ellipse(30565.705597, 16291.618942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31340.047200, 15431.776000, 773.477622, 773.477622, 0.000000, X, Y) && !ellipse(23583.321045, 11502.425323, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3.gif
[Thu May  3 08:35:01 2012] Mean detx,y = (149.32, 26.71) 
[Thu May  3 08:35:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 08:54:26 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 08:54:26 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May  3 08:54:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May  5 21:04:10 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:10 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May  5 21:04:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:18 2012] Using photon index=1.80, rate=2.71, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src3.arf
[Sat May  5 21:04:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:18 2012] Updating source flux to 5.7e-12
[Sat May  5 21:13:02 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat May  5 21:13:02 2012] Flag c found in src. 3 procflags, skipping spectral fitting