[Tue May  1 11:39:18 2012] Detection parameters:
  Position = (325.9, 348.8) = 14 0 55.90 2 54 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.2 +/- 33.9
  Background counts = 347.9
  Rate = 0.006 +/- 0.0005

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 4.16'
[Tue May  1 11:50:41 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue May  1 11:50:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.995
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.51"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue May  1 20:18:13 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed May  2 03:25:44 2012] Warning, spatial fit 24 centroid is now closest to src. 10
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:25:45 2012] Source is confused with source 10
[Wed May  2 03:26:42 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Wed May  2 03:26:42 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.995
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.51"
[Thu May  3 03:10:40 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24.ximg exists
[Thu May  3 03:10:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24.csv
[Thu May  3 03:10:40 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu May  3 03:10:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24.csv
[Thu May  3 03:10:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May  3 03:10:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:04:25 2012] Source 26 is offset by 6.718727 and 5.497302 pixels which is larger than
2 X fitted extent = 7.823632 x 2.407954, not incorporating fit results
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:16 2012] XMMSAS src. selection expression = ellipse(28309.103271, 30295.195282, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 08:05:16 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26_src.reg
[Thu May  3 08:05:16 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (288, 311) - (363, 386)
[Thu May  3 08:05:16 2012] XMMSAS bgd. selection expression = annulus(28309.103271, 30295.195282, 1087.500000, 2175.000000, X, Y) && !ellipse(26883.618000, 26535.454000, 3303.672095, 3303.672095, 128.207000, X, Y) && !ellipse(26434.526000, 27800.076200, 3773.568109, 3773.568109, 0.000000, X, Y) && !ellipse(25940.575531, 29121.056366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.772980, 30464.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.586426, 29509.529633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.236000, 27591.814400, 1240.528036, 1240.528036, 0.000000, X, Y) && !ellipse(26983.407318, 33332.540833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30638.317993, 28653.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.540000, 31879.540000, 1390.080040, 1390.080040, 0.000000, X, Y) && !ellipse(26132.828857, 31603.965424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.306946, 31166.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.872000, 29985.666000, 1353.664039, 1353.664039, 0.000000, X, Y) && !ellipse(29585.524536, 29716.550232, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 08:05:16 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26.gif
[Thu May  3 09:41:33 2012] Mean detx,y = (2609.22, -1718.94) 
[Thu May  3 09:41:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 09:42:11 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 09:42:12 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu May  3 09:42:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat May  5 00:42:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 00:42:26 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:13 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:13 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat May  5 21:04:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:20 2012] Using photon index=1.80, rate=0.00556, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src26.arf
[Sat May  5 21:04:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:20 2012] Updating source flux to 1.5e-14
[Sat May  5 21:13:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting