[Tue May  1 11:39:16 2012] Detection parameters:
  Position = (330.9, 315.1) = 14 0 54.45 2 52 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1361.0 +/- 57.8
  Background counts = 382.0
  Rate = 0.02 +/- 0.0007

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 2.65'
[Tue May  1 11:50:41 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue May  1 11:50:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.75"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May  1 20:18:13 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May  2 03:25:44 2012] Spatial fit model total counts = 8256.470000, observed total counts = 8257.000000
[Wed May  2 03:25:44 2012] Offset between fit and detection position for source 12 = 7.521557 pixels
[Wed May  2 03:25:44 2012] 8040.254000 total counts/ 7267.000000 bgd. counts: snr = 9.070779
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 7.521557 pixels
  Position = (323.9, 317.7) = 14 0 56.50 2 52 30.5
  Extent = 15.5 (15.5-31.0)", rotation angle = 0
  Source counts = 773.3 +/- 89.7
  Background counts = 7267.0
  Rate = 0.01 +/- 0.001
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:25:45 2012] Source is confused with source 2
[Wed May  2 03:26:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 15.51"
[Wed May  2 03:26:42 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.968
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 15.51"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May  3 03:10:41 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May  3 08:04:25 2012] Warning, spatial fit 11 centroid is now closest to src. 29
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(28128.236000, 27591.814400, 930.396027, 930.396027, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (270, 264) - (377, 371)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(28128.236000, 27591.814400, 1550.660045, 3101.320089, X, Y) && !ellipse(26883.618000, 26535.454000, 3303.672095, 3303.672095, 128.207000, X, Y) && !ellipse(26434.526000, 27800.076200, 3773.568109, 3773.568109, 0.000000, X, Y) && !ellipse(25940.575531, 29121.056366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.626892, 27611.019073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.772980, 30464.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.586426, 29509.529633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.103271, 30295.195282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30638.317993, 28653.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.997345, 26307.797943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.502000, 25739.295400, 654.860819, 367.032811, 339.057100, X, Y) && !ellipse(27520.540000, 31879.540000, 1390.080040, 1390.080040, 0.000000, X, Y) && !ellipse(27267.306946, 31166.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.796661, 31088.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.799805, 31252.856384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.872000, 29985.666000, 1353.664039, 1353.664039, 0.000000, X, Y) && !ellipse(29585.524536, 29716.550232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.488000, 26239.702000, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(24685.298920, 25251.229034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.767975, 25703.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28820.817688, 24852.180786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.524841, 24496.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.194000, 24497.794000, 1218.152035, 1218.152035, 0.000000, X, Y) && !ellipse(25050.376068, 24113.615356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.986420, 23892.480621, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12.gif
[Thu May  3 09:24:20 2012] Mean detx,y = (1360.79, 612.18) 
[Thu May  3 09:24:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 09:24:52 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 09:24:53 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May  3 09:24:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat May  5 21:04:12 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:12 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat May  5 21:04:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:18 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src12.arf
[Sat May  5 21:04:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:18 2012] Updating source flux to 2.5e-14
[Sat May  5 21:13:02 2012] Flag c found in src. 12 procflags, skipping spectral fitting