[Tue May  1 11:39:16 2012] Detection parameters:
  Position = (308.3, 339.7) = 14 1 1.03 2 54 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2020.6 +/- 63.7
  Background counts = 361.0
  Rate = 0.03 +/- 0.0008

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 3.08'
[Tue May  1 11:50:41 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue May  1 11:50:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.012
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.97"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May  1 20:18:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 20:18:13 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May  1 20:18:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  1 20:18:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:44 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.094834 pixels away
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:26:42 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Wed May  2 03:26:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.012
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.97"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  3 03:10:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:04:25 2012] Source 11 is offset by -5.536547 and 6.074341 pixels which is larger than
2 X fitted extent = 4.854529 x 4.854529, not incorporating fit results
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] Counts = 2020.557007, rescaling region sizes by 2.000000
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(26771.586426, 29509.529633, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (233, 265) - (383, 415)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(26771.586426, 29509.529633, 4350.000000, 8700.000000, X, Y) && !ellipse(26883.618000, 26535.454000, 3303.672095, 3303.672095, 128.207000, X, Y) && !ellipse(26434.526000, 27800.076200, 3773.568109, 3773.568109, 0.000000, X, Y) && !ellipse(25940.575531, 29121.056366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.626892, 27611.019073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18747.529620, 31873.970400, 442.372813, 442.372813, 0.000000, X, Y) && !ellipse(28711.772980, 30464.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28128.236000, 27591.814400, 1240.528036, 1240.528036, 0.000000, X, Y) && !ellipse(22489.860860, 22550.170400, 430.827212, 430.827212, 0.000000, X, Y) && !ellipse(29119.006200, 37869.517600, 435.285613, 435.285613, 0.000000, X, Y) && !ellipse(31408.188873, 33301.641602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.407318, 33332.540833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.599091, 32750.800018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.103271, 30295.195282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20190.291000, 30282.069400, 422.249612, 422.249612, 0.000000, X, Y) && !ellipse(30638.317993, 28653.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.819458, 27304.156097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.997345, 26307.797943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.502000, 25739.295400, 654.860819, 367.032811, 339.057100, X, Y) && !ellipse(19396.248245, 25458.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18509.505630, 23297.746094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.892517, 37221.885284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27670.470490, 36860.915466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.327820, 36696.680664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35046.338348, 34443.439606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.540000, 31879.540000, 1390.080040, 1390.080040, 0.000000, X, Y) && !ellipse(26132.828857, 31603.965424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.306946, 31166.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.796661, 31088.539276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.799805, 31252.856384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.872000, 29985.666000, 1353.664039, 1353.664039, 0.000000, X, Y) && !ellipse(24111.276276, 30401.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29585.524536, 29716.550232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17434.701981, 27453.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.299316, 27014.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.285370, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.488000, 26239.702000, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(23266.663666, 26399.035370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.298920, 25251.229034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.767975, 25703.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28820.817688, 24852.180786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36048.999542, 24726.366913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.524841, 24496.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.194000, 24497.794000, 1218.152035, 1218.152035, 0.000000, X, Y) && !ellipse(25050.376068, 24113.615356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.986420, 23892.480621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.014670, 22956.485701, 570.392490, 384.459510, 18.300977, X, Y) && !ellipse(31061.346200, 21825.767200, 367.347211, 367.347211, 0.000000, X, Y) && !ellipse(28550.308000, 22224.476000, 1358.472039, 1358.472039, 0.000000, X, Y) && !ellipse(29094.993960, 21085.606699, 485.825172, 429.846372, 280.015117, X, Y) && !ellipse(19367.050000, 20180.700000, 1580.512045, 1580.512045, 0.000000, X, Y) && !ellipse(29327.050000, 20471.658000, 1488.976043, 1488.976043, 0.000000, X, Y) && !ellipse(29727.046000, 19457.416000, 1522.592044, 1522.592044, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11.gif
[Thu May  3 09:20:39 2012] Mean detx,y = (787.20, -988.63) 
[Thu May  3 09:20:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 09:23:54 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 09:23:55 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May  3 09:23:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May  4 22:55:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 22:55:37 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:12 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:12 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May  5 21:04:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:18 2012] Using photon index=1.80, rate=0.0269, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src11.arf
[Sat May  5 21:04:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:18 2012] Updating source flux to 6.6e-14
[Sat May  5 21:13:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting