[Tue May  1 11:39:14 2012] Detection parameters:
  Position = (251.0, 197.8) = 14 1 17.67 2 43 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3921.5 +/- 78.6
  Background counts = 254.0
  Rate = 0.04 +/- 0.0007

[Tue May  1 11:39:27 2012] Off-axis axis estimate = 8.07'
[Tue May  1 11:50:41 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Tue May  1 11:50:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  1 11:50:41 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Tue May  1 11:50:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Tue May  1 11:50:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.46"
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Tue May  1 20:18:11 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May  1 20:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Tue May  1 20:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 20:18:12 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May  1 20:18:12 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May  1 20:18:12 2012] Fit fullrun_pn_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 03:25:44 2012] Spatial fit model total counts = 4659.210000, observed total counts = 4320.000000
[Wed May  2 03:25:44 2012] Offset between fit and detection position for source 1 = 0.130026 pixels
[Wed May  2 03:25:44 2012] 4689.650000 total counts/ 2424.100000 bgd. counts: snr = 46.014890
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.130026 pixels
  Position = (251.1, 197.7) = 14 1 17.65 2 43 48.5
  Extent = 6.2 (5.9-6.4)", rotation angle = 0
  Source counts = 2265.6 +/- 68.5
  Background counts = 2424.1
  Rate = 0.03 +/- 0.001
[Wed May  2 03:25:45 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:45 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:45 2012] Source does appear to be extended
[Wed May  2 03:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 03:26:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 03:26:42 2012] Initial guess for spatial extent in simple fitting = 6.16"
[Wed May  2 03:26:42 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.089
[Wed May  2 03:26:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.16"
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 03:10:39 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  3 03:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 03:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  3 03:10:41 2012] fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  3 03:10:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  3 03:10:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:04:25 2012] Warning, spatial fit 1 centroid is now closest to src. 38
[Thu May  3 08:04:25 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:25 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:25 2012] Source does appear to be extended
[Thu May  3 08:04:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:05:15 2012] Counts = 2265.550000, rescaling region sizes by 2.000000
[Thu May  3 08:05:15 2012] XMMSAS src. selection expression = ellipse(21793.293200, 17151.800400, 739.525221, 739.525221, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing source region out to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_src.reg
[Thu May  3 08:05:15 2012] Extracting stamp from image fullrun_pn_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (209, 155) - (294, 240)
[Thu May  3 08:05:15 2012] XMMSAS bgd. selection expression = annulus(21793.293200, 17151.800400, 2465.084071, 4930.168142, X, Y) && !ellipse(23065.863800, 12911.254227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19470.307600, 16971.804400, 360.915210, 360.915210, 0.000000, X, Y) && !ellipse(16193.013809, 14793.630173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17871.768921, 19163.805740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22132.104599, 18826.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.370300, 16936.444580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19367.050000, 20180.700000, 1580.512045, 1580.512045, 0.000000, X, Y) && !ellipse(18207.411087, 18076.175644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.321045, 11502.425323, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 08:05:15 2012] Writing fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1.gif
[Thu May  3 08:05:49 2012] Mean detx,y = (-8183.30, 8063.37) 
[Thu May  3 08:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 08:08:13 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 08:08:13 2012] Setting source spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  3 08:08:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May  5 21:04:10 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:10 2012] Error reading totcts from fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  5 21:04:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:17 2012] Using photon index=1.80, rate=0.0332, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:04:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:17 2012] Updating source flux to 1.8e-13
[Sat May  5 21:20:32 2012] Reading fit data from xmm0551830101/analysis//spectral/fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv
[Sat May  5 21:20:32 2012] Spectral fit parameter nH value = 3.3499e+20
[Sat May  5 21:20:32 2012] Spectral fit parameter PhoIndex value = 2.31533
[Sat May  5 21:20:32 2012] Failed to get F(0.3-8.0) from xmm0551830101/analysis//spectral/fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May  5 21:20:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:20:32 2012] Using Nh = 3.3e+20, photon index=2.32, rate=0.0332, arf fullrun_pn_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:20:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:20:32 2012] Updating source flux to 1.4e-13