[Tue May  1 11:39:40 2012] Detection parameters:
  Position = (324.9, 350.1) = 14 0 56.21 2 54 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.7 +/- 25.9
  Background counts = 218.3
  Rate = 0.002 +/- 0.0003

[Tue May  1 11:39:44 2012] Off-axis axis estimate = 4.20'
[Wed May  2 00:56:45 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Wed May  2 00:56:45 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Wed May  2 00:56:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.032
[Wed May  2 00:56:45 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.53"
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29.csv
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29.csv
[Wed May  2 03:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May  2 03:25:15 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed May  2 03:26:14 2012] Warning, spatial fit 29 centroid is now closest to src. 33
[Wed May  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:26:14 2012] Assessing source extent using major
[Wed May  2 03:26:14 2012] Source does appear to be extended
[Wed May  2 03:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 05:34:00 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:34:00 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Thu May  3 05:34:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.032
[Thu May  3 05:34:00 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.53"
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May  3 08:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25.csv
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May  3 08:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25.csv
[Thu May  3 08:03:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May  3 08:03:54 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu May  3 08:04:50 2012] Warning, spatial fit 25 centroid is now closest to src. 33
[Thu May  3 08:04:50 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:50 2012] Assessing source extent using major
[Thu May  3 08:04:50 2012] Source does appear to be extended
[Thu May  3 08:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 17:25:37 2012] XMMSAS src. selection expression = ellipse(28214.709015, 30406.945465, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 17:25:37 2012] Writing source region out to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31_src.reg
[Sat May  5 17:25:37 2012] Extracting stamp from image fullrun_mos2_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (287, 313) - (362, 388)
[Sat May  5 17:25:37 2012] XMMSAS bgd. selection expression = annulus(28214.709015, 30406.945465, 1087.500000, 2175.000000, X, Y) && !ellipse(26413.239700, 27791.685400, 3185.928092, 3185.928092, 0.000000, X, Y) && !ellipse(26960.702051, 28617.473082, 2602.864075, 2602.861228, 1.677633, X, Y) && !ellipse(26972.832336, 33326.771454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.498535, 30234.796021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30639.656128, 28638.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28228.427551, 29687.647583, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 17:25:37 2012] Writing fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31.gif
[Sat May  5 18:12:16 2012] Mean detx,y = (-2537.13, 1670.39) 
[Sat May  5 18:12:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 18:12:40 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 18:12:40 2012] Setting source spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May  5 18:12:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat May  5 20:26:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 20:26:20 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:31 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:31 2012] Error reading totcts from fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May  5 21:04:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:34 2012] Using photon index=1.80, rate=0.00163, arf fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src31.arf
[Sat May  5 21:04:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:34 2012] Updating source flux to 1.9e-14
[Sat May  5 21:08:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting