[Tue May  1 11:39:40 2012] Detection parameters:
  Position = (280.5, 377.0) = 14 1 9.09 2 56 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.2 +/- 21.9
  Background counts = 171.3
  Rate = 0.002 +/- 0.0003

[Tue May  1 11:39:44 2012] Off-axis axis estimate = 5.84'
[Wed May  2 00:56:45 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Wed May  2 00:56:45 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Wed May  2 00:56:45 2012] source mask rpix=2.1, npix_max = 28, mask sum = 24, frac = 0.855
[Wed May  2 00:56:45 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.35"
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23.csv
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23.csv
[Wed May  2 03:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed May  2 03:25:15 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed May  2 03:26:14 2012] Spatial fit model total counts = 1268.270000, observed total counts = 1193.000000
[Wed May  2 03:26:14 2012] Offset between fit and detection position for source 30 = 0.777872 pixels
[Wed May  2 03:26:14 2012] 1283.439000 total counts/ 1182.410000 bgd. counts: snr = 2.938069
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.777872 pixels
  Position = (281.2, 376.6) = 14 1 8.90 2 56 46.9
  Extent = 5.9 (4.4-9.0)", rotation angle = 0
  Source counts = 101.0 +/- 35.8
  Background counts = 1182.4
  Rate = 0.001 +/- 0.0004
[Wed May  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:26:14 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:26:14 2012] Source does appear to be extended
[Wed May  2 03:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 05:34:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 05:34:00 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Thu May  3 05:34:00 2012] source mask rpix=1.4, npix_max = 13, mask sum = 10, frac = 0.726
[Thu May  3 05:34:00 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 5.90"
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20.ximg exists
[Thu May  3 08:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20.csv
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May  3 08:03:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20.csv
[Thu May  3 08:03:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May  3 08:03:54 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May  3 08:04:50 2012] Warning, spatial fit 20 centroid is now closest to src. 32
[Thu May  3 08:04:50 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:50 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:50 2012] Source does appear to be extended
[Thu May  3 08:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:04:50 2012] Deleting source due to low Poisson probability 0.9