[Tue May  1 11:39:38 2012] Detection parameters:
  Position = (232.3, 348.7) = 14 1 23.09 2 54 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.0 +/- 24.9
  Background counts = 145.2
  Rate = 0.003 +/- 0.0003

[Tue May  1 11:39:44 2012] Off-axis axis estimate = 6.02'
[Wed May  2 00:56:45 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Wed May  2 00:56:45 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Wed May  2 00:56:45 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Wed May  2 00:56:45 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.44"
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13.csv
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13.csv
[Wed May  2 03:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  2 03:25:15 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed May  2 03:26:14 2012] Source 13 is offset by 7.562756 and -4.606989 pixels which is larger than
2 X fitted extent = 1.085021 x 1.085021, not incorporating fit results
[Wed May  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:26:14 2012] Assessing source extent using major
[Wed May  2 03:26:14 2012] Source does appear to be extended
[Wed May  2 03:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 05:34:00 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:34:00 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Thu May  3 05:34:00 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Thu May  3 05:34:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.44"
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src12.ximg exists
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May  3 08:03:54 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May  3 08:03:54 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu May  3 08:04:50 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.878500 pixels away
[Thu May  3 08:04:50 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:50 2012] Assessing source extent using major
[Thu May  3 08:04:50 2012] Source does appear to be extended
[Thu May  3 08:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 17:25:37 2012] XMMSAS src. selection expression = ellipse(20163.985809, 30290.933960, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 17:25:37 2012] Writing source region out to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13_src.reg
[Sat May  5 17:25:37 2012] Extracting stamp from image fullrun_mos2_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (195, 311) - (270, 386)
[Sat May  5 17:25:37 2012] XMMSAS bgd. selection expression = annulus(20163.985809, 30290.933960, 1087.500000, 2175.000000, X, Y) && !ellipse(18741.499435, 32099.266449, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 17:25:37 2012] Writing fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13.gif
[Sat May  5 18:03:32 2012] Mean detx,y = (4960.21, 4526.48) 
[Sat May  5 18:03:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 18:04:15 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 18:04:15 2012] Setting source spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May  5 18:04:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat May  5 20:09:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 20:09:03 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:30 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:30 2012] Error reading totcts from fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May  5 21:04:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:33 2012] Using photon index=1.80, rate=0.00292, arf fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src13.arf
[Sat May  5 21:04:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:33 2012] Updating source flux to 4.3e-14
[Sat May  5 21:08:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting