[Tue May  1 11:39:36 2012] Detection parameters:
  Position = (304.9, 320.0) = 14 1 2.02 2 52 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65024.7 +/- 300.9
  Background counts = 241.2
  Rate = 0.6 +/- 0.003

[Tue May  1 11:39:44 2012] Off-axis axis estimate = 1.63'
[Wed May  2 00:56:45 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed May  2 00:56:45 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed May  2 00:56:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Wed May  2 00:56:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 03:25:14 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  2 03:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 03:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  2 03:25:15 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  2 03:25:15 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 03:26:14 2012] Spatial fit model total counts = 104238.000000, observed total counts = 100284.000000
[Wed May  2 03:26:14 2012] Offset between fit and detection position for source 1 = 0.455353 pixels
[Wed May  2 03:26:14 2012] 92982.800000 total counts/ 25600.000000 bgd. counts: snr = 421.142500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.455353 pixels
  Position = (304.5, 320.3) = 14 1 2.13 2 52 41.7
  Extent = 10.7 (10.7-10.7)", rotation angle = 0
  Source counts = 67382.8 +/- 304.9
  Background counts = 25600.0
  Rate = 0.7 +/- 0.003
[Wed May  2 03:26:14 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:26:14 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:26:14 2012] Source does appear to be extended
[Wed May  2 03:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 05:34:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 05:34:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 05:34:00 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu May  3 05:34:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.794
[Thu May  3 05:34:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.74"
[Thu May  3 08:03:53 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  3 08:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 08:03:53 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  3 08:03:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 08:03:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  3 08:03:54 2012] fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  3 08:03:54 2012] Fit fullrun_mos2_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  3 08:04:50 2012] Spatial fit model total counts = 123072.000000, observed total counts = 116491.000000
[Thu May  3 08:04:50 2012] Offset between fit and detection position for source 1 = 0.428265 pixels
[Thu May  3 08:04:50 2012] 120446.800000 total counts/ 40000.000000 bgd. counts: snr = 402.234000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.428265 pixels
  Position = (304.2, 320.0) = 14 1 2.23 2 52 40.5
  Extent = 13.3 (13.2-13.4)", rotation angle = 0
  Source counts = 80446.8 +/- 347.1
  Background counts = 40000.0
  Rate = 0.8 +/- 0.004
[Thu May  3 08:04:50 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:50 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:50 2012] Source does appear to be extended
[Thu May  3 08:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:04:50 2012] Source is confused with source 2
[Sat May  5 17:25:36 2012] Counts = 80446.800000, rescaling region sizes by 3.000000
[Sat May  5 17:25:36 2012] XMMSAS src. selection expression = ellipse(26413.239700, 27791.685400, 2389.446069, 2389.446069, 0.000000, X, Y)
[Sat May  5 17:25:36 2012] Writing source region out to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_src.reg
[Sat May  5 17:25:36 2012] Extracting stamp from image fullrun_mos2_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (167, 183) - (441, 457)
[Sat May  5 17:25:36 2012] XMMSAS bgd. selection expression = annulus(26413.239700, 27791.685400, 11947.230344, 23894.460688, X, Y) && !ellipse(26960.702051, 28617.473082, 2602.864075, 2602.861228, 1.677633, X, Y) && !ellipse(18741.499435, 32099.266449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21792.803820, 17203.605200, 643.457619, 425.832012, 33.570000, X, Y) && !ellipse(29038.396000, 37851.470000, 454.327213, 454.327213, 0.000000, X, Y) && !ellipse(13526.186890, 28829.688141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33470.812103, 16589.104355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22487.778660, 22541.096000, 321.265609, 321.265609, 0.000000, X, Y) && !ellipse(26972.832336, 33326.771454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24266.898163, 28381.938690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24350.531586, 27847.813171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.498535, 30234.796021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20163.985809, 30290.933960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23052.779816, 12933.502045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34706.178650, 29639.028687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19502.211600, 17005.150400, 377.766411, 377.766411, 0.000000, X, Y) && !ellipse(30639.656128, 28638.629578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28440.973267, 37263.943604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28228.427551, 29687.647583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32084.817780, 23493.591675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24033.369751, 26412.727356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.948000, 30452.702000, 1301.432037, 1301.432037, 0.000000, X, Y) && !ellipse(28214.709015, 30406.945465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15866.974884, 19868.341660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.536652, 24921.832825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14651.125458, 37821.863495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35604.714905, 28166.074188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.439880, 24754.592529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.849691, 25861.042563, 1163.080033, 1163.080033, 0.000000, X, Y) && !ellipse(24954.956970, 24141.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12035.887085, 22908.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13055.645340, 17962.953247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11982.118759, 25304.138458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.959200, 39877.733400, 982.032028, 982.032028, 0.000000, X, Y) && !ellipse(23248.054600, 37480.004000, 3520.352101, 1093.720031, 70.080218, X, Y)
[Sat May  5 17:25:36 2012] Writing fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1.gif
[Sat May  5 17:26:43 2012] Mean detx,y = (54.56, -136.72) 
[Sat May  5 17:26:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 17:49:18 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 17:49:19 2012] Setting source spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  5 17:49:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May  5 21:04:29 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:30 2012] Error reading totcts from fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  5 21:04:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:32 2012] Using photon index=1.80, rate=0.811, arf fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:04:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:32 2012] Updating source flux to 7e-12
[Sat May  5 21:08:53 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat May  5 21:13:02 2012] Reading fit data from xmm0551830101/analysis//spectral/fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv
[Sat May  5 21:13:02 2012] Spectral fit parameter nH value = 6.04254e+20
[Sat May  5 21:13:02 2012] Spectral fit parameter PhoIndex value = 1.76775
[Sat May  5 21:13:02 2012] Failed to get F(0.3-8.0) from xmm0551830101/analysis//spectral/fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May  5 21:13:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:13:02 2012] Using Nh = 6e+20, photon index=1.77, rate=0.811, arf fullrun_mos2_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:13:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:13:02 2012] Updating source flux to 7.6e-12