[Tue May  1 11:39:28 2012] Detection parameters:
  Position = (216.3, 368.4) = 14 1 27.74 2 56 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1672.2 +/- 52.7
  Background counts = 145.3
  Rate = 0.01 +/- 0.0005

[Tue May  1 11:39:35 2012] Off-axis axis estimate = 7.82'
[Tue May  1 20:18:14 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Tue May  1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Tue May  1 20:18:14 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.755
[Tue May  1 20:18:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.34"
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3.csv
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3.csv
[Wed May  2 00:56:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May  2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May  2 00:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 03:25:59 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Wed May  2 03:25:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:59 2012] Assessing source extent using major
[Wed May  2 03:25:59 2012] Source does appear to be extended
[Wed May  2 03:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 03:10:42 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu May  3 03:10:42 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu May  3 03:10:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.755
[Thu May  3 03:10:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.34"
[Thu May  3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 05:33:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  3 05:33:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  3 05:33:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  3 05:33:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 08:04:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.501872 pixels away
[Thu May  3 08:04:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:38 2012] Assessing source extent using major
[Thu May  3 08:04:38 2012] Source does appear to be extended
[Thu May  3 08:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 05:36:51 2012] Counts = 1672.239136, rescaling region sizes by 2.000000
[Sat May  5 05:36:51 2012] XMMSAS src. selection expression = ellipse(18770.654312, 31998.409851, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May  5 05:36:51 2012] Writing source region out to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4_src.reg
[Sat May  5 05:36:51 2012] Extracting stamp from image fullrun_mos1_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (141, 293) - (291, 443)
[Sat May  5 05:36:51 2012] XMMSAS bgd. selection expression = annulus(18770.654312, 31998.409851, 4350.000000, 8700.000000, X, Y) && !ellipse(26420.460800, 27781.249600, 3380.256097, 3380.256097, 0.000000, X, Y) && !ellipse(13531.482346, 28818.021942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.578800, 29194.360000, 2153.280062, 2153.280062, 0.000000, X, Y) && !ellipse(25187.774000, 29646.368000, 1316.192038, 1316.192038, 0.000000, X, Y) && !ellipse(24528.923004, 29152.290131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28292.042000, 27453.506000, 1229.064035, 1229.064035, 0.000000, X, Y) && !ellipse(28251.313904, 30604.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.410553, 25427.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23703.936371, 28797.355194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.504000, 26935.876000, 2458.128071, 2458.128071, 0.000000, X, Y) && !ellipse(24672.512299, 30046.841187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12083.945770, 22857.189117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26354.059174, 30911.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12018.974548, 25317.073761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25684.512000, 30523.502000, 1288.008037, 1288.008037, 0.000000, X, Y)
[Sat May  5 05:36:51 2012] Writing fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4.gif
[Sat May  5 06:04:15 2012] Mean detx,y = (6879.02, -5731.42) 
[Sat May  5 06:04:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 06:08:18 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 06:08:18 2012] Setting source spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May  5 06:08:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May  5 08:30:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 08:30:36 2012] rmf not generated due to insufficient counts
[Sat May  5 21:04:25 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:25 2012] Error reading totcts from fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May  5 21:04:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:28 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src4.arf
[Sat May  5 21:04:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:28 2012] Updating source flux to 2.4e-13
[Sat May  5 21:04:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting