[Tue May 1 11:39:34 2012] Detection parameters: Position = (139.5, 263.3) = 14 1 50.05 2 48 34.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 192.5 +/- 21.9 Background counts = 109.3 Rate = 0.002 +/- 0.0002 [Tue May 1 11:39:35 2012] Off-axis axis estimate = 11.80' [Tue May 1 20:18:14 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting [Tue May 1 20:18:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 12.33" [Tue May 1 20:18:14 2012] source mask rpix=2.8, npix_max = 44, mask sum = 47, frac = 1.057 [Tue May 1 20:18:14 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.33" [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31.ximg exists [Wed May 2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31.csv [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31_1.ximg exists [Wed May 2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31.csv [Wed May 2 00:56:44 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Wed May 2 00:56:44 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Wed May 2 03:25:59 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.861476 pixels away [Wed May 2 03:25:59 2012] Vigneting correction estimate = 1.000000 [Wed May 2 03:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 03:25:59 2012] Assessing source extent using major [Wed May 2 03:25:59 2012] Source does appear to be extended [Wed May 2 03:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 3 03:10:42 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting [Thu May 3 03:10:42 2012] Initial guess for spatial extent in simple fitting = 12.33" [Thu May 3 03:10:42 2012] source mask rpix=2.8, npix_max = 44, mask sum = 47, frac = 1.057 [Thu May 3 03:10:42 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.33" [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src28.ximg exists [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src28_1.ximg exists [Thu May 3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src28 appears to have run properly [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Thu May 3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Thu May 3 08:04:38 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 15.536221 pixels away [Thu May 3 08:04:38 2012] Vigneting correction estimate = 1.000000 [Thu May 3 08:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 08:04:38 2012] Assessing source extent using major [Thu May 3 08:04:38 2012] Source does appear to be extended [Thu May 3 08:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 05:36:52 2012] XMMSAS src. selection expression = ellipse(12083.945770, 22857.189117, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 5 05:36:52 2012] Writing source region out to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39_src.reg [Sat May 5 05:36:52 2012] Extracting stamp from image fullrun_mos1_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (102, 226) - (177, 301) [Sat May 5 05:36:52 2012] XMMSAS bgd. selection expression = annulus(12083.945770, 22857.189117, 1087.500000, 2175.000000, X, Y) && !ellipse(12018.974548, 25317.073761, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 5 05:36:52 2012] Writing fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39.gif [Sat May 5 07:04:29 2012] Mean detx,y = (843.21, -15372.38) [Sat May 5 07:04:32 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 5 07:05:16 2012] Binned source spectrum to 10 counts/bin [Sat May 5 07:05:16 2012] Setting source spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Sat May 5 07:05:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39_bgd.pi.gz [Sat May 5 17:05:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 5 17:05:53 2012] rmf not generated due to insufficient counts [Sat May 5 21:04:27 2012] Updating aperture counts using extracted products [Sat May 5 21:04:27 2012] Error reading totcts from fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Sat May 5 21:04:29 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 21:04:29 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src39.arf [Sat May 5 21:04:29 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 21:04:29 2012] Updating source flux to 5.2e-14 [Sat May 5 21:04:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting