[Tue May 1 11:39:33 2012] Detection parameters: Position = (287.3, 276.3) = 14 1 7.11 2 49 29.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 107.2 +/- 22.5 Background counts = 178.1 Rate = 0.001 +/- 0.0002 [Tue May 1 11:39:35 2012] Off-axis axis estimate = 1.80' [Tue May 1 20:18:14 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting [Tue May 1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 7.33" [Tue May 1 20:18:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048 [Tue May 1 20:18:14 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.33" [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41.ximg exists [Wed May 2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41.csv [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41_1.ximg exists [Wed May 2 00:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41.csv [Wed May 2 00:56:44 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Wed May 2 00:56:44 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Wed May 2 03:25:59 2012] Source 37 is offset by -3.192794 and -0.289932 pixels which is larger than 2 X fitted extent = 1.802290 x 1.802290, not incorporating fit results [Wed May 2 03:25:59 2012] Spatial fit model total counts = 1566.000000, observed total counts = 1566.000000 [Wed May 2 03:25:59 2012] Offset between fit and detection position for source 37 = 0.725810 pixels [Wed May 2 03:25:59 2012] 1597.019600 total counts/ 1541.360000 bgd. counts: snr = 1.417712 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.725810 pixels Position = (288.0, 275.9) = 14 1 6.93 2 49 28.6 Extent = 6.0 (2.7-10.6)", rotation angle = 0 Source counts = 55.7 +/- 40.0 Background counts = 1541.4 Rate = 0.0006 +/- 0.0004 Deleting source due to low Poisson probability