[Tue May  1 11:39:32 2012] Detection parameters:
  Position = (337.2, 311.3) = 14 0 52.63 2 52 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.3 +/- 24.1
  Background counts = 209.8
  Rate = 0.002 +/- 0.0003

[Tue May  1 11:39:35 2012] Off-axis axis estimate = 2.96'
[Tue May  1 20:18:14 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Tue May  1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Tue May  1 20:18:14 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.023
[Tue May  1 20:18:14 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.91"
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25.csv
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25.csv
[Wed May  2 00:56:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May  2 00:56:44 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed May  2 03:25:59 2012] Spatial fit model total counts = 2820.130000, observed total counts = 2749.000000
[Wed May  2 03:25:59 2012] Offset between fit and detection position for source 29 = 7.380905 pixels
[Wed May  2 03:25:59 2012] 2583.506000 total counts/ 2352.320000 bgd. counts: snr = 4.766651
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.380905 pixels
  Position = (344.3, 309.1) = 14 0 50.58 2 51 52.9
  Extent = 15.8 (15.7-15.8)", rotation angle = 0
  Source counts = 231.2 +/- 50.8
  Background counts = 2352.3
  Rate = 0.002 +/- 0.0005
[Wed May  2 03:25:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:59 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:59 2012] Source does appear to be extended
[Wed May  2 03:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 03:10:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 03:10:42 2012] Initial guess for spatial extent in simple fitting = 15.79"
[Thu May  3 03:10:42 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.938
[Thu May  3 03:10:42 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 15.79"
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src22.ximg exists
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu May  3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src22 appears to have run properly
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu May  3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu May  3 08:04:38 2012] Spatial fit model total counts = 14764.200000, observed total counts = 14716.000000
[Thu May  3 08:04:38 2012] Offset between fit and detection position for source 29 = 5.296712 pixels
[Thu May  3 08:04:38 2012] Warning, changing simple spatial fit ID from 22 to 11
[Thu May  3 08:04:38 2012] 13493.030000 total counts/ 10051.100000 bgd. counts: snr = 34.331694
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 5.296712 pixels
  Position = (339.1, 310.2) = 14 0 52.09 2 51 57.7
  Extent = 30.7 (30.7-61.5)", rotation angle = 0
  Source counts = 3441.9 +/- 116.2
  Background counts = 10051.1
  Rate = 0.03 +/- 0.001
[Thu May  3 08:04:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:38 2012] Source does appear to be extended
[Thu May  3 08:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:04:38 2012] Source is confused with source 28
[Sat May  5 05:36:52 2012] Counts = 3441.930000, rescaling region sizes by 2.000000
[Sat May  5 05:36:52 2012] XMMSAS src. selection expression = ellipse(29452.504000, 26935.876000, 3687.192106, 3687.192106, 0.000000, X, Y)
[Sat May  5 05:36:52 2012] Writing source region out to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29_src.reg
[Sat May  5 05:36:52 2012] Extracting stamp from image fullrun_mos1_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (127, 98) - (551, 522)
[Sat May  5 05:36:52 2012] XMMSAS bgd. selection expression = annulus(29452.504000, 26935.876000, 12290.640354, 24581.280707, X, Y) && !ellipse(26420.460800, 27781.249600, 3380.256097, 3380.256097, 0.000000, X, Y) && !ellipse(21770.350220, 17120.521744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18770.654312, 31998.409851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13531.482346, 28818.021942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.578800, 29194.360000, 2153.280062, 2153.280062, 0.000000, X, Y) && !ellipse(29126.804504, 37891.773071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22475.351460, 22573.595000, 376.204940, 376.204940, 0.000000, X, Y) && !ellipse(25187.774000, 29646.368000, 1316.192038, 1316.192038, 0.000000, X, Y) && !ellipse(24528.923004, 29152.290131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28292.042000, 27453.506000, 1229.064035, 1229.064035, 0.000000, X, Y) && !ellipse(28251.313904, 30604.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.410553, 25427.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.285200, 25679.176000, 738.647221, 738.647221, 0.000000, X, Y) && !ellipse(22228.437800, 18709.017000, 771.416022, 771.416022, 0.000000, X, Y) && !ellipse(34737.284973, 29626.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23703.936371, 28797.355194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23034.433563, 12854.802994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.512299, 30046.841187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17840.840485, 19162.016251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12083.945770, 22857.189117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26354.059174, 30911.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13073.994247, 17958.496780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15832.281616, 19852.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39328.167816, 32533.015930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12018.974548, 25317.073761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25684.512000, 30523.502000, 1288.008037, 1288.008037, 0.000000, X, Y)
[Sat May  5 05:36:52 2012] Writing fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29.gif
[Sat May  5 06:43:07 2012] Mean detx,y = (-333.40, 380.42) 
[Sat May  5 06:43:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 07:02:02 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 07:02:02 2012] Setting source spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May  5 07:02:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat May  5 21:04:27 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:27 2012] Error reading totcts from fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May  5 21:04:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:29 2012] Using photon index=1.80, rate=0.0342, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src29.arf
[Sat May  5 21:04:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:29 2012] Updating source flux to 2.9e-13
[Sat May  5 21:04:38 2012] Flag c found in src. 29 procflags, skipping spectral fitting