[Tue May 1 11:39:31 2012] Detection parameters: Position = (300.5, 343.1) = 14 1 3.30 2 54 16.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 593.6 +/- 37.4 Background counts = 203.2 Rate = 0.006 +/- 0.0004 [Tue May 1 11:39:35 2012] Off-axis axis estimate = 3.24' [Tue May 1 20:18:14 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting [Tue May 1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 8.05" [Tue May 1 20:18:14 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.814 [Tue May 1 20:18:14 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.05" [Wed May 2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src6.ximg exists [Wed May 2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src6_1.ximg exists [Wed May 2 00:56:43 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src6 appears to have run properly [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Wed May 2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Wed May 2 00:56:44 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Wed May 2 03:25:59 2012] Warning, spatial fit 6 centroid is now closest to src. 12 [Wed May 2 03:25:59 2012] Source 19 is offset by 2.103404 and 7.578297 pixels which is larger than 2 X fitted extent = 2.245664 x 2.245664, not incorporating fit results [Wed May 2 03:25:59 2012] Vigneting correction estimate = 1.000000 [Wed May 2 03:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 03:25:59 2012] Assessing source extent using major [Wed May 2 03:25:59 2012] Source does appear to be extended [Wed May 2 03:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 03:25:59 2012] Source is confused with source 22 [Wed May 2 03:25:59 2012] Source is confused with source 12 [Thu May 3 03:10:42 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting [Thu May 3 03:10:42 2012] Initial guess for spatial extent in simple fitting = 8.05" [Thu May 3 03:10:42 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.814 [Thu May 3 03:10:42 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.05" [Thu May 3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5.ximg exists [Thu May 3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5.csv [Thu May 3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5_1.ximg exists [Thu May 3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5.csv [Thu May 3 05:33:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Thu May 3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Thu May 3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Thu May 3 08:04:38 2012] Spatial fit model total counts = 5087.460000, observed total counts = 4933.000000 [Thu May 3 08:04:38 2012] Offset between fit and detection position for source 19 = 7.050339 pixels [Thu May 3 08:04:38 2012] 4944.728000 total counts/ 4248.750000 bgd. counts: snr = 10.677385 Spatial fit parameters: Offset between fit and detection position for source 19 = 7.050339 pixels Position = (303.1, 336.6) = 14 1 2.53 2 53 52.7 Extent = 16.1 (16.1-32.2)", rotation angle = 0 Source counts = 696.0 +/- 70.3 Background counts = 4248.8 Rate = 0.007 +/- 0.0007 [Thu May 3 08:04:38 2012] Spatial fit model total counts = 5558.310000, observed total counts = 5446.000000 [Thu May 3 08:04:38 2012] Offset between fit and detection position for source 19 = 6.686428 pixels [Thu May 3 08:04:38 2012] Warning, changing simple spatial fit ID from 5 to 9 [Thu May 3 08:04:38 2012] 5404.500000 total counts/ 4191.050000 bgd. counts: snr = 18.743922 Spatial fit parameters: Offset between fit and detection position for source 19 = 6.686428 pixels Position = (309.8, 336.1) = 14 1 0.59 2 53 50.6 Extent = 26.9 (26.9-53.8)", rotation angle = 0 Source counts = 1213.5 +/- 73.5 Background counts = 4191.1 Rate = 0.01 +/- 0.0007 [Thu May 3 08:04:38 2012] Vigneting correction estimate = 1.000000 [Thu May 3 08:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 08:04:38 2012] Assessing source extent using major axis lower bound [Thu May 3 08:04:38 2012] Source does appear to be extended [Thu May 3 08:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 05:36:51 2012] Counts = 1213.450000, rescaling region sizes by 2.000000 [Sat May 5 05:36:51 2012] XMMSAS src. selection expression = ellipse(26904.578800, 29194.360000, 3229.920093, 3229.920093, 0.000000, X, Y) [Sat May 5 05:36:51 2012] Writing source region out to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19_src.reg [Sat May 5 05:36:51 2012] Extracting stamp from image fullrun_mos1_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (124, 150) - (495, 522) [Sat May 5 05:36:51 2012] XMMSAS bgd. selection expression = annulus(26904.578800, 29194.360000, 10766.400310, 21532.800620, X, Y) && !ellipse(26420.460800, 27781.249600, 3380.256097, 3380.256097, 0.000000, X, Y) && !ellipse(21770.350220, 17120.521744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18770.654312, 31998.409851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13531.482346, 28818.021942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29126.804504, 37891.773071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22475.351460, 22573.595000, 376.204940, 376.204940, 0.000000, X, Y) && !ellipse(25187.774000, 29646.368000, 1316.192038, 1316.192038, 0.000000, X, Y) && !ellipse(24528.923004, 29152.290131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28292.042000, 27453.506000, 1229.064035, 1229.064035, 0.000000, X, Y) && !ellipse(28251.313904, 30604.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.410553, 25427.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.285200, 25679.176000, 738.647221, 738.647221, 0.000000, X, Y) && !ellipse(22228.437800, 18709.017000, 771.416022, 771.416022, 0.000000, X, Y) && !ellipse(34737.284973, 29626.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23703.936371, 28797.355194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.504000, 26935.876000, 2458.128071, 2458.128071, 0.000000, X, Y) && !ellipse(23034.433563, 12854.802994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.512299, 30046.841187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17840.840485, 19162.016251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12083.945770, 22857.189117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26354.059174, 30911.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13073.994247, 17958.496780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15832.281616, 19852.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39328.167816, 32533.015930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12018.974548, 25317.073761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25684.512000, 30523.502000, 1288.008037, 1288.008037, 0.000000, X, Y) [Sat May 5 05:36:51 2012] Writing fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19.gif [Sat May 5 06:14:26 2012] Mean detx,y = (296.40, -9.78) [Sat May 5 06:14:34 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 5 06:32:03 2012] Binned source spectrum to 10 counts/bin [Sat May 5 06:32:03 2012] Setting source spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Sat May 5 06:32:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19_bgd.pi.gz [Sat May 5 21:04:25 2012] Updating aperture counts using extracted products [Sat May 5 21:04:25 2012] Error reading totcts from fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Sat May 5 21:04:28 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 21:04:28 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src19.arf [Sat May 5 21:04:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 21:04:28 2012] Updating source flux to 1e-13 [Sat May 5 21:04:38 2012] Flag b found in src. 19 procflags, skipping spectral fitting [Sat May 5 21:04:38 2012] Flag c found in src. 19 procflags, skipping spectral fitting