[Tue May  1 11:39:28 2012] Detection parameters:
  Position = (304.5, 320.0) = 14 1 2.13 2 52 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68912.3 +/- 315.3
  Background counts = 212.2
  Rate = 0.6 +/- 0.003

[Tue May  1 11:39:35 2012] Off-axis axis estimate = 1.62'
[Tue May  1 20:18:14 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue May  1 20:18:14 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue May  1 20:18:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Tue May  1 20:18:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 00:56:43 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  2 00:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 00:56:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  2 00:56:44 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  2 00:56:44 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 03:25:59 2012] Spatial fit model total counts = 106107.000000, observed total counts = 108117.000000
[Wed May  2 03:25:59 2012] Offset between fit and detection position for source 1 = 0.165988 pixels
[Wed May  2 03:25:59 2012] 105989.200000 total counts/ 25600.000000 bgd. counts: snr = 502.432500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.165988 pixels
  Position = (304.4, 319.9) = 14 1 2.17 2 52 40.0
  Extent = 13.5 (13.4-13.6)", rotation angle = 0
  Source counts = 80389.2 +/- 325.6
  Background counts = 25600.0
  Rate = 0.8 +/- 0.003
[Wed May  2 03:25:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 03:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 03:25:59 2012] Assessing source extent using major axis lower bound
[Wed May  2 03:25:59 2012] Source does appear to be extended
[Wed May  2 03:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 03:10:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 03:10:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 03:10:42 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Thu May  3 03:10:42 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.946
[Thu May  3 03:10:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.48"
[Thu May  3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 05:33:58 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  3 05:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 05:33:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  3 05:33:59 2012] fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  3 05:33:59 2012] Fit fullrun_mos1_xmm0551830101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  3 08:04:38 2012] Spatial fit model total counts = 144403.000000, observed total counts = 144430.000000
[Thu May  3 08:04:38 2012] Offset between fit and detection position for source 1 = 0.112693 pixels
[Thu May  3 08:04:38 2012] 144731.300000 total counts/ 59262.600000 bgd. counts: snr = 351.088616
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.112693 pixels
  Position = (304.2, 319.9) = 14 1 2.20 2 52 40.0
  Extent = 14.1 (14.0-14.2)", rotation angle = 0
  Source counts = 85468.7 +/- 380.4
  Background counts = 59262.6
  Rate = 0.8 +/- 0.004
[Thu May  3 08:04:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 08:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 08:04:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 08:04:38 2012] Source does appear to be extended
[Thu May  3 08:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 08:04:38 2012] Source is confused with source 19
[Sat May  5 05:36:51 2012] Counts = 85468.700000, rescaling region sizes by 3.000000
[Sat May  5 05:36:51 2012] XMMSAS src. selection expression = ellipse(26420.460800, 27781.249600, 2535.192073, 2535.192073, 0.000000, X, Y)
[Sat May  5 05:36:51 2012] Writing source region out to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_src.reg
[Sat May  5 05:36:51 2012] Extracting stamp from image fullrun_mos1_xmm0551830101_pi300-10000_cl_sm2.00.img.gz, (159, 174) - (450, 466)
[Sat May  5 05:36:51 2012] XMMSAS bgd. selection expression = annulus(26420.460800, 27781.249600, 12675.960365, 25351.920729, X, Y) && !ellipse(21770.350220, 17120.521744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18770.654312, 31998.409851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13531.482346, 28818.021942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.578800, 29194.360000, 2153.280062, 2153.280062, 0.000000, X, Y) && !ellipse(29126.804504, 37891.773071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22475.351460, 22573.595000, 376.204940, 376.204940, 0.000000, X, Y) && !ellipse(25187.774000, 29646.368000, 1316.192038, 1316.192038, 0.000000, X, Y) && !ellipse(24528.923004, 29152.290131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28292.042000, 27453.506000, 1229.064035, 1229.064035, 0.000000, X, Y) && !ellipse(28251.313904, 30604.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.410553, 25427.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.285200, 25679.176000, 738.647221, 738.647221, 0.000000, X, Y) && !ellipse(22228.437800, 18709.017000, 771.416022, 771.416022, 0.000000, X, Y) && !ellipse(34737.284973, 29626.762451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23703.936371, 28797.355194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.504000, 26935.876000, 2458.128071, 2458.128071, 0.000000, X, Y) && !ellipse(23034.433563, 12854.802994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.512299, 30046.841187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17840.840485, 19162.016251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12083.945770, 22857.189117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26354.059174, 30911.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13073.994247, 17958.496780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15832.281616, 19852.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39328.167816, 32533.015930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12018.974548, 25317.073761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25684.512000, 30523.502000, 1288.008037, 1288.008037, 0.000000, X, Y)
[Sat May  5 05:36:51 2012] Writing fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1.gif
[Sat May  5 05:37:40 2012] Mean detx,y = (87.99, -192.45) 
[Sat May  5 05:37:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 05:58:53 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 05:58:54 2012] Setting source spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  5 05:58:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May  5 21:04:25 2012] Updating aperture counts using extracted products
[Sat May  5 21:04:25 2012] Error reading totcts from fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May  5 21:04:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:04:27 2012] Using photon index=1.80, rate=0.848, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:04:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:04:28 2012] Updating source flux to 7e-12
[Sat May  5 21:04:38 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat May  5 21:08:53 2012] Reading fit data from xmm0551830101/analysis//spectral/fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv
[Sat May  5 21:08:53 2012] Spectral fit parameter nH value = 4.84105e+20
[Sat May  5 21:08:53 2012] Spectral fit parameter PhoIndex value = 1.74312
[Sat May  5 21:08:53 2012] Failed to get F(0.3-8.0) from xmm0551830101/analysis//spectral/fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May  5 21:08:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 21:08:53 2012] Using Nh = 4.8e+20, photon index=1.74, rate=0.848, arf fullrun_mos1_xmm0551830101_pi300-10000_pass1_cl_src1.arf
[Sat May  5 21:08:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 21:08:53 2012] Updating source flux to 7.6e-12