[Sun Mar  4 20:28:30 2012] Detection parameters:
  Position = (381.0, 355.7) = 15 10 37.31 5 48 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 784.6 +/- 38.2
  Background counts = 164.5
  Rate = 0.04 +/- 0.002

[Sun Mar  4 20:28:31 2012] Off-axis axis estimate = 7.29'
[Sun Mar  4 20:34:01 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 20:34:01 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Mar  4 20:34:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.136
[Sun Mar  4 20:34:01 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.07"
[Sun Mar  4 22:16:26 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar  4 22:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5.csv
[Sun Mar  4 22:16:26 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar  4 22:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5.csv
[Sun Mar  4 22:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 22:16:27 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar  4 22:16:27 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar  4 22:16:27 2012] Fit fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Mar  5 00:42:53 2012] Spatial fit model total counts = 2168.320000, observed total counts = 2086.000000
[Mon Mar  5 00:42:53 2012] Offset between fit and detection position for source 5 = 0.224097 pixels
[Mon Mar  5 00:42:53 2012] 2142.915000 total counts/ 1685.420000 bgd. counts: snr = 11.143774
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.224097 pixels
  Position = (380.8, 355.6) = 15 10 37.36 5 48 13.5
  Extent = 4.4 (3.9-4.8)", rotation angle = 0
  Source counts = 457.5 +/- 46.3
  Background counts = 1685.4
  Rate = 0.02 +/- 0.002
[Mon Mar  5 00:42:53 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 00:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 00:42:53 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 00:42:53 2012] Source does appear to be extended
[Mon Mar  5 00:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 00:43:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar  5 00:43:11 2012] Initial guess for spatial extent in simple fitting = 4.35"
[Mon Mar  5 00:43:11 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.999
[Mon Mar  5 00:43:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.35"
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5.csv
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5.csv
[Mon Mar  5 01:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Mar  5 01:56:16 2012] Fit fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Mar  5 03:51:08 2012] Spatial fit model total counts = 2185.220000, observed total counts = 2124.000000
[Mon Mar  5 03:51:08 2012] Offset between fit and detection position for source 5 = 0.008246 pixels
[Mon Mar  5 03:51:08 2012] 2164.092000 total counts/ 1707.690000 bgd. counts: snr = 11.044423
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.008246 pixels
  Position = (380.8, 355.6) = 15 10 37.37 5 48 13.5
  Extent = 4.4 (3.9-4.9)", rotation angle = 0
  Source counts = 456.4 +/- 46.5
  Background counts = 1707.7
  Rate = 0.02 +/- 0.002
[Mon Mar  5 03:51:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 03:51:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 03:51:08 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 03:51:08 2012] Source does appear to be extended
[Mon Mar  5 03:51:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 03:51:25 2012] XMMSAS src. selection expression = ellipse(33082.754400, 30887.788200, 263.555408, 263.555408, 0.000000, X, Y)
[Mon Mar  5 03:51:25 2012] Writing source region out to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5_src.reg
[Mon Mar  5 03:51:25 2012] Extracting stamp from image fullrun_pn_xmm0551780501_pi300-10000_cl_sm2.00.img.gz, (366, 340) - (396, 371)
[Mon Mar  5 03:51:25 2012] XMMSAS bgd. selection expression = annulus(33082.754400, 30887.788200, 439.259013, 878.518025, X, Y)
[Mon Mar  5 03:51:25 2012] Writing fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5.gif
[Mon Mar  5 04:09:53 2012] Mean detx,y = (6986.33, -1877.46) 
[Mon Mar  5 04:09:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 04:10:08 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 04:10:08 2012] Setting source spectrum file to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar  5 04:10:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar  5 17:56:47 2012] Updating aperture counts using extracted products
[Mon Mar  5 17:56:47 2012] Error reading totcts from fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar  5 17:56:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 17:56:48 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src5.arf
[Mon Mar  5 17:56:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 17:56:48 2012] Updating source flux to 6.9e-14