[Sun Mar  4 20:28:30 2012] Detection parameters:
  Position = (305.2, 335.3) = 15 10 59.42 5 46 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1868.0 +/- 61.5
  Background counts = 508.0
  Rate = 0.09 +/- 0.003

[Sun Mar  4 20:28:31 2012] Off-axis axis estimate = 2.71'
[Sun Mar  4 20:34:01 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 20:34:01 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Sun Mar  4 20:34:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Sun Mar  4 20:34:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.79"
[Sun Mar  4 22:16:26 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar  4 22:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3.csv
[Sun Mar  4 22:16:26 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar  4 22:16:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3.csv
[Sun Mar  4 22:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 22:16:27 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar  4 22:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar  4 22:16:27 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar  4 22:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar  4 22:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:42:53 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Mon Mar  5 00:42:53 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 00:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 00:42:53 2012] Assessing source extent using major
[Mon Mar  5 00:42:53 2012] Source does appear to be extended
[Mon Mar  5 00:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 00:43:11 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 00:43:11 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Mon Mar  5 00:43:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Mon Mar  5 00:43:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.79"
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3.csv
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3.csv
[Mon Mar  5 01:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Mar  5 01:56:16 2012] fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Mar  5 01:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Mar  5 01:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 03:51:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 29.755158 pixels away
[Mon Mar  5 03:51:08 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.258662 pixels away
[Mon Mar  5 03:51:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 03:51:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 03:51:08 2012] Assessing source extent using major
[Mon Mar  5 03:51:08 2012] Source does appear to be extended
[Mon Mar  5 03:51:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 03:51:25 2012] Counts = 1868.003540, rescaling region sizes by 2.000000
[Mon Mar  5 03:51:25 2012] XMMSAS src. selection expression = ellipse(26500.170746, 29119.572205, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar  5 03:51:25 2012] Writing source region out to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar  5 03:51:25 2012] Extracting stamp from image fullrun_pn_xmm0551780501_pi300-10000_cl_sm2.00.img.gz, (230, 260) - (380, 410)
[Mon Mar  5 03:51:25 2012] XMMSAS bgd. selection expression = annulus(26500.170746, 29119.572205, 4350.000000, 8700.000000, X, Y) && !ellipse(27461.687240, 26644.789800, 3424.776099, 3424.776099, 0.000000, X, Y) && !ellipse(27352.326294, 29313.378723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33082.754400, 30887.788200, 351.407210, 351.407210, 0.000000, X, Y) && !ellipse(30532.000000, 26666.003876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23067.363892, 26254.092010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30622.977234, 26152.176056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.705048, 22673.230103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.572937, 32070.228394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33761.399750, 38061.883453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32604.895000, 37270.290200, 460.488013, 460.488013, 0.000000, X, Y) && !ellipse(26621.473724, 31428.749420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25999.934021, 30908.889374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.461273, 30563.528473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.560028, 30130.633911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25634.495789, 30127.418671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25153.704498, 30144.540955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.527496, 29572.307800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30184.002655, 28918.958191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.234375, 28479.524292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.000000, 27616.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24295.102539, 26829.022675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.952209, 26208.975098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.289917, 25428.364624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24790.159302, 24848.540741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28079.411377, 22665.719025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19273.122589, 21817.672134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.327057, 22611.941406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24693.872009, 31081.006958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.445679, 30940.927612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21804.260254, 30383.878571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33213.935364, 28989.149200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30635.779785, 28482.832458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.569458, 27517.131927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31118.575623, 25652.520782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.955505, 24937.194824, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 03:51:25 2012] Writing fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3.gif
[Mon Mar  5 04:04:48 2012] Mean detx,y = (228.17, -1163.69) 
[Mon Mar  5 04:04:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 04:06:42 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 04:06:43 2012] Setting source spectrum file to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar  5 04:06:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Mar  5 09:14:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar  5 09:14:40 2012] rmf not generated due to insufficient counts
[Mon Mar  5 17:56:47 2012] Updating aperture counts using extracted products
[Mon Mar  5 17:56:47 2012] Error reading totcts from fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar  5 17:56:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 17:56:48 2012] Using photon index=1.80, rate=0.0908, arf fullrun_pn_xmm0551780501_pi300-10000_pass1_cl_src3.arf
[Mon Mar  5 17:56:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 17:56:48 2012] Updating source flux to 2.2e-13
[Mon Mar  5 18:00:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting