[Sun Mar  4 20:29:27 2012] Detection parameters:
  Position = (340.5, 324.9) = 15 10 49.12 5 46 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.0 +/- 31.1
  Background counts = 324.1
  Rate = 0.007 +/- 0.001

[Sun Mar  4 20:29:28 2012] Off-axis axis estimate = 3.60'
[Sun Mar  4 23:43:10 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 23:43:10 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Sun Mar  4 23:43:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Sun Mar  4 23:43:10 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.23"
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12.csv
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12.csv
[Mon Mar  5 00:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Mar  5 00:42:42 2012] Fit fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Mar  5 00:43:03 2012] Spatial fit model total counts = 5347.830000, observed total counts = 5353.000000
[Mon Mar  5 00:43:03 2012] Offset between fit and detection position for source 24 = 9.633599 pixels
[Mon Mar  5 00:43:03 2012] 5002.007000 total counts/ 4666.960000 bgd. counts: snr = 4.904432
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 9.633599 pixels
  Position = (347.6, 331.4) = 15 10 47.06 5 46 28.5
  Extent = 16.5 (16.4-32.9)", rotation angle = 0
  Source counts = 335.0 +/- 70.7
  Background counts = 4667.0
  Rate = 0.01 +/- 0.002
[Mon Mar  5 00:43:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 00:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 00:43:03 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 00:43:03 2012] Source does appear to be extended
[Mon Mar  5 00:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 02:58:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar  5 02:58:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar  5 02:58:51 2012] Initial guess for spatial extent in simple fitting = 16.46"
[Mon Mar  5 02:58:51 2012] source mask rpix=3.8, npix_max = 73, mask sum = 67, frac = 0.913
[Mon Mar  5 02:58:51 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 16.46"
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12.csv
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12.csv
[Mon Mar  5 03:50:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Mar  5 03:50:59 2012] Fit fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Mar  5 03:51:15 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.832717 pixels away
[Mon Mar  5 03:51:15 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 03:51:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 03:51:15 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 03:51:15 2012] Source does appear to be extended
[Mon Mar  5 03:51:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 16:46:40 2012] XMMSAS src. selection expression = ellipse(30189.896000, 28786.824000, 987.594028, 987.594028, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing source region out to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24_src.reg
[Mon Mar  5 16:46:40 2012] Extracting stamp from image fullrun_mos2_xmm0551780501_pi300-10000_cl_sm2.00.img.gz, (291, 275) - (404, 388)
[Mon Mar  5 16:46:40 2012] XMMSAS bgd. selection expression = annulus(30189.896000, 28786.824000, 1645.990047, 3291.980095, X, Y) && !ellipse(27400.385800, 26672.415660, 3390.072098, 3390.072098, 0.000000, X, Y) && !ellipse(27852.087769, 26746.530914, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(33090.534125, 30914.658074, 519.306080, 304.407656, 68.186517, X, Y) && !ellipse(27052.066376, 29795.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26188.621643, 32135.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.827850, 30038.291992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.007965, 30396.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.052000, 31134.556000, 1357.160039, 1357.160039, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24.gif
[Mon Mar  5 17:11:17 2012] Mean detx,y = (-3404.52, 264.01) 
[Mon Mar  5 17:11:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 17:11:37 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 17:11:37 2012] Setting source spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar  5 17:11:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Mar  5 17:56:50 2012] Updating aperture counts using extracted products
[Mon Mar  5 17:56:50 2012] Error reading totcts from fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar  5 17:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 17:56:50 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src24.arf
[Mon Mar  5 17:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 17:56:50 2012] Updating source flux to 1.1e-13