[Sun Mar  4 20:29:27 2012] Detection parameters:
  Position = (320.7, 308.0) = 15 10 54.89 5 44 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10882.3 +/- 133.9
  Background counts = 457.4
  Rate = 0.4 +/- 0.004

[Sun Mar  4 20:29:28 2012] Off-axis axis estimate = 1.76'
[Sun Mar  4 23:43:10 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 23:43:10 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Mar  4 23:43:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.737
[Sun Mar  4 23:43:10 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 00:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 00:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:43:03 2012] Spatial fit model total counts = 45306.600000, observed total counts = 56608.000000
[Mon Mar  5 00:43:03 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 00:43:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 00:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 00:43:03 2012] Assessing source extent using major
[Mon Mar  5 00:43:03 2012] Source does appear to be extended
[Mon Mar  5 00:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 00:43:03 2012] Source is confused with source 1
[Mon Mar  5 02:58:51 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 02:58:51 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon Mar  5 02:58:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.737
[Mon Mar  5 02:58:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.31"
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 03:50:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 03:50:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 03:51:15 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Mon Mar  5 03:51:15 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.636123 pixels away
[Mon Mar  5 03:51:15 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 03:51:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 03:51:15 2012] Assessing source extent using major
[Mon Mar  5 03:51:15 2012] Source does appear to be extended
[Mon Mar  5 03:51:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 16:46:40 2012] Counts = 10882.258789, rescaling region sizes by 3.000000
[Mon Mar  5 16:46:40 2012] XMMSAS src. selection expression = ellipse(27852.087769, 26746.530914, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing source region out to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar  5 16:46:40 2012] Extracting stamp from image fullrun_mos2_xmm0551780501_pi300-10000_cl_sm2.00.img.gz, (208, 195) - (433, 420)
[Mon Mar  5 16:46:40 2012] XMMSAS bgd. selection expression = annulus(27852.087769, 26746.530914, 9787.500000, 19575.000000, X, Y) && !ellipse(27400.385800, 26672.415660, 3390.072098, 3390.072098, 0.000000, X, Y) && !ellipse(16214.214993, 27970.229422, 545.793120, 322.193006, 105.735424, X, Y) && !ellipse(24427.155731, 30001.859680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24371.246800, 22685.032000, 359.299210, 359.299210, 0.000000, X, Y) && !ellipse(33090.534125, 30914.658074, 519.306080, 304.407656, 68.186517, X, Y) && !ellipse(27052.066376, 29795.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.712708, 27873.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25336.216000, 28207.612000, 961.008028, 961.008028, 0.000000, X, Y) && !ellipse(26188.621643, 32135.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.827850, 30038.291992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.994690, 22736.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30189.896000, 28786.824000, 1316.792038, 1316.792038, 0.000000, X, Y) && !ellipse(27052.007965, 30396.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25826.496887, 24067.290405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.982544, 24941.981842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.437592, 42072.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.059600, 29927.128000, 1322.704038, 745.749621, 79.171000, X, Y) && !ellipse(24382.137000, 28380.490000, 1122.232032, 1122.232032, 0.000000, X, Y) && !ellipse(27999.052000, 31134.556000, 1357.160039, 1357.160039, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2.gif
[Mon Mar  5 16:57:37 2012] Mean detx,y = (-617.97, -1213.48) 
[Mon Mar  5 16:57:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 17:08:01 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 17:08:01 2012] Setting source spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar  5 17:08:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar  5 17:17:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar  5 17:17:46 2012] rmf not generated due to insufficient counts
[Mon Mar  5 17:56:50 2012] Updating aperture counts using extracted products
[Mon Mar  5 17:56:50 2012] Error reading totcts from fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar  5 17:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 17:56:50 2012] Using photon index=1.80, rate=0.356, arf fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src2.arf
[Mon Mar  5 17:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 17:56:50 2012] Updating source flux to 3e-12
[Mon Mar  5 17:59:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting