[Sun Mar  4 20:29:27 2012] Detection parameters:
  Position = (314.2, 305.9) = 15 10 56.77 5 44 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20734.1 +/- 174.1
  Background counts = 451.0
  Rate = 0.7 +/- 0.006

[Sun Mar  4 20:29:28 2012] Off-axis axis estimate = 1.27'
[Sun Mar  4 23:43:10 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 23:43:10 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sun Mar  4 23:43:10 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Sun Mar  4 23:43:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.06"
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1.csv
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1.csv
[Mon Mar  5 00:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar  5 00:42:42 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar  5 00:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Mar  5 00:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 00:43:03 2012] Spatial fit model total counts = 65778.300000, observed total counts = 59775.000000
[Mon Mar  5 00:43:03 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 00:43:03 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 00:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 00:43:03 2012] Assessing source extent using major
[Mon Mar  5 00:43:03 2012] Source does appear to be extended
[Mon Mar  5 00:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 00:43:03 2012] Source is confused with source 2
[Mon Mar  5 02:58:51 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 02:58:51 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Mon Mar  5 02:58:51 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Mon Mar  5 02:58:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.06"
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar  5 03:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 03:50:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar  5 03:50:59 2012] fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar  5 03:50:59 2012] Fit fullrun_mos2_xmm0551780501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar  5 03:51:15 2012] Spatial fit model total counts = 65739.000000, observed total counts = 59775.000000
[Mon Mar  5 03:51:15 2012] Offset between fit and detection position for source 1 = 1.747511 pixels
[Mon Mar  5 03:51:15 2012] 64411.100000 total counts/ 25600.000000 bgd. counts: snr = 242.569375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.747511 pixels
  Position = (315.5, 307.1) = 15 10 56.41 5 44 42.7
  Extent = 14.1 (14.1-28.3)", rotation angle = 0
  Source counts = 38811.1 +/- 253.8
  Background counts = 25600.0
  Rate = 1 +/- 0.008
[Mon Mar  5 03:51:15 2012] Spatial fit model total counts = 65555.500000, observed total counts = 56608.000000
[Mon Mar  5 03:51:15 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 03:51:15 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 03:51:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 03:51:15 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 03:51:15 2012] Source does appear to be extended
[Mon Mar  5 03:51:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 16:46:40 2012] Counts = 38811.100000, rescaling region sizes by 3.000000
[Mon Mar  5 16:46:40 2012] XMMSAS src. selection expression = ellipse(27400.385800, 26672.415660, 2542.554073, 2542.554073, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing source region out to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar  5 16:46:40 2012] Extracting stamp from image fullrun_mos2_xmm0551780501_pi300-10000_cl_sm2.00.img.gz, (169, 161) - (462, 453)
[Mon Mar  5 16:46:40 2012] XMMSAS bgd. selection expression = annulus(27400.385800, 26672.415660, 12712.770366, 25425.540732, X, Y) && !ellipse(27852.087769, 26746.530914, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16214.214993, 27970.229422, 545.793120, 322.193006, 105.735424, X, Y) && !ellipse(24427.155731, 30001.859680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24371.246800, 22685.032000, 359.299210, 359.299210, 0.000000, X, Y) && !ellipse(33090.534125, 30914.658074, 519.306080, 304.407656, 68.186517, X, Y) && !ellipse(27052.066376, 29795.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.712708, 27873.335968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25336.216000, 28207.612000, 961.008028, 961.008028, 0.000000, X, Y) && !ellipse(26188.621643, 32135.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.827850, 30038.291992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.994690, 22736.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30189.896000, 28786.824000, 1316.792038, 1316.792038, 0.000000, X, Y) && !ellipse(27052.007965, 30396.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25826.496887, 24067.290405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.982544, 24941.981842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.437592, 42072.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.059600, 29927.128000, 1322.704038, 745.749621, 79.171000, X, Y) && !ellipse(24382.137000, 28380.490000, 1122.232032, 1122.232032, 0.000000, X, Y) && !ellipse(27999.052000, 31134.556000, 1357.160039, 1357.160039, 0.000000, X, Y)
[Mon Mar  5 16:46:40 2012] Writing fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1.gif
[Mon Mar  5 16:46:59 2012] Mean detx,y = (-458.76, -1222.03) 
[Mon Mar  5 16:47:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 16:57:21 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 16:57:22 2012] Setting source spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 16:57:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar  5 17:56:50 2012] Updating aperture counts using extracted products
[Mon Mar  5 17:56:50 2012] Error reading totcts from fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 17:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 17:56:50 2012] Using photon index=1.80, rate=1.2, arf fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 17:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 17:56:50 2012] Updating source flux to 1e-11
[Mon Mar  5 17:59:01 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon Mar  5 17:59:01 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Mar  5 18:00:40 2012] Reading fit data from xmm0551780501/analysis//spectral/fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar  5 18:00:40 2012] Spectral fit parameter nH value = 9.11348e+20
[Mon Mar  5 18:00:40 2012] Spectral fit parameter PhoIndex value = 1.7721
[Mon Mar  5 18:00:40 2012] Failed to get F(0.3-8.0) from xmm0551780501/analysis//spectral/fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar  5 18:00:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 18:00:40 2012] Using Nh = 9.1e+20, photon index=1.77, rate=1.2, arf fullrun_mos2_xmm0551780501_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 18:00:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 18:00:40 2012] Updating source flux to 1.2e-11