[Sun Feb 19 11:55:43 2012] Detection parameters:
  Position = (263.6, 348.1) = 15 11 10.18 5 47 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.9 +/- 51.1
  Background counts = 482.2
  Rate = 0.01 +/- 0.001

[Sun Feb 19 11:55:48 2012] Off-axis axis estimate = 4.40'
[Sun Feb 19 12:06:31 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 12:06:31 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Sun Feb 19 12:06:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 0, frac = 0.000
[Sun Feb 19 12:06:31 2012] Skipping simple spatial due to low active detector fraction
[Mon Feb 20 10:14:24 2012] Spatial fit model total counts = 4871.690000, observed total counts = 4871.000000
[Mon Feb 20 10:14:24 2012] Offset between fit and detection position for source 8 = 5.134256 pixels
[Mon Feb 20 10:14:24 2012] Warning, changing simple spatial fit ID from -1 to 30
[Mon Feb 20 10:14:24 2012] 4857.712000 total counts/ 4557.540000 bgd. counts: snr = 4.446363
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.134256 pixels
  Position = (266.4, 352.4) = 15 11 9.39 5 47 54.4
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 300.2 +/- 69.7
  Background counts = 4557.5
  Rate = 0.009 +/- 0.002
[Mon Feb 20 10:14:24 2012] Spatial fit model total counts = 5400.430000, observed total counts = 5418.000000
[Mon Feb 20 10:14:24 2012] Offset between fit and detection position for source 8 = 4.957116 pixels
[Mon Feb 20 10:14:24 2012] Warning, changing simple spatial fit ID from 30 to 31
[Mon Feb 20 10:14:24 2012] 5459.690000 total counts/ 4230.080000 bgd. counts: snr = 18.905715
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.957116 pixels
  Position = (268.0, 347.8) = 15 11 8.91 5 47 34.1
  Extent = 16.5 (16.5-16.5)", rotation angle = 0
  Source counts = 1229.6 +/- 73.9
  Background counts = 4230.1
  Rate = 0.04 +/- 0.002
[Mon Feb 20 10:14:24 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:24 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 10:14:24 2012] Source does appear to be extended
[Mon Feb 20 10:14:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:14:24 2012] Source is confused with source 36
[Mon Feb 20 10:14:24 2012] Source is confused with source 37
[Mon Feb 20 10:15:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:15:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 10:15:09 2012] Initial guess for spatial extent in simple fitting = 16.48"
[Mon Feb 20 10:15:09 2012] source mask rpix=3.8, npix_max = 73, mask sum = 44, frac = 0.598
[Mon Feb 20 10:15:09 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 16.48"
[Mon Feb 20 14:49:54 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6.ximg exists
[Mon Feb 20 14:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6.csv
[Mon Feb 20 14:49:54 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Feb 20 14:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6.csv
[Mon Feb 20 14:49:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb 20 14:49:55 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb 20 18:29:38 2012] Warning, spatial fit 6 centroid is now closest to src. 43
[Mon Feb 20 18:29:38 2012] Spatial fit model total counts = 4866.040000, observed total counts = 4871.000000
[Mon Feb 20 18:29:38 2012] Offset between fit and detection position for source 8 = 1.007279 pixels
[Mon Feb 20 18:29:38 2012] Warning, changing simple spatial fit ID from 6 to 32
[Mon Feb 20 18:29:38 2012] 4455.700000 total counts/ 3943.190000 bgd. counts: snr = 8.161660
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.007279 pixels
  Position = (267.9, 348.8) = 15 11 8.95 5 47 38.4
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 512.5 +/- 66.8
  Background counts = 3943.2
  Rate = 0.02 +/- 0.002
[Mon Feb 20 18:29:38 2012] Spatial fit model total counts = 5323.000000, observed total counts = 5418.000000
[Mon Feb 20 18:29:38 2012] Offset between fit and detection position for source 8 = 0.148497 pixels
[Mon Feb 20 18:29:38 2012] Warning, changing simple spatial fit ID from 32 to 33
[Mon Feb 20 18:29:38 2012] 4914.200000 total counts/ 2815.980000 bgd. counts: snr = 39.539961
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.148497 pixels
  Position = (267.9, 348.6) = 15 11 8.94 5 47 37.8
  Extent = 17.3" x 17.3", rotation angle = 326
  Source counts = 2098.2 +/- 70.1
  Background counts = 2816.0
  Rate = 0.06 +/- 0.002
[Mon Feb 20 18:29:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:38 2012] Assessing source extent using major
[Mon Feb 20 18:29:38 2012] Source does appear to be extended
[Mon Feb 20 18:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:30:14 2012] Counts = 2098.220000, rescaling region sizes by 2.000000
[Mon Feb 20 18:30:14 2012] XMMSAS src. selection expression = ellipse(23258.848000, 30281.684000, 2070.948060, 2070.948060, 326.258800, X, Y)
[Mon Feb 20 18:30:14 2012] Writing source region out to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8_src.reg
[Mon Feb 20 18:30:14 2012] Extracting stamp from image fullrun_pn_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (149, 230) - (387, 468)
[Mon Feb 20 18:30:14 2012] XMMSAS bgd. selection expression = annulus(23258.848000, 30281.684000, 6903.160199, 13806.320397, X, Y) && !ellipse(26994.603000, 26800.413200, 6718.800193, 6718.800193, 0.000000, X, Y) && !ellipse(15747.968000, 28046.584000, 540.863216, 540.863216, 0.000000, X, Y) && !ellipse(23946.400020, 22750.650800, 393.869611, 393.869611, 0.000000, X, Y) && !ellipse(29931.676636, 28140.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.949219, 29127.274445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23141.529480, 25566.473938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.070000, 29231.542000, 1380.632040, 802.448023, 54.858000, X, Y) && !ellipse(26618.766094, 29550.183214, 905.728026, 594.888159, 75.186075, X, Y) && !ellipse(27687.701400, 22691.764200, 432.896812, 303.234409, 3.141560, X, Y) && !ellipse(28714.674927, 30497.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.318000, 30333.424000, 1344.464039, 1344.464039, 0.000000, X, Y) && !ellipse(24004.318420, 26905.599030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24613.623749, 25426.360077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16160.951675, 22811.304901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32661.856802, 30992.592660, 541.433462, 541.433462, 0.000000, X, Y) && !ellipse(33351.744659, 38137.580994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25723.504200, 32154.055800, 689.900820, 689.900820, 0.000000, X, Y) && !ellipse(24156.249817, 26379.874023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.304108, 25951.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.435425, 23956.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.130000, 23400.330000, 812.832023, 812.832023, 0.000000, X, Y) && !ellipse(15451.250397, 40835.385468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.593800, 39276.760200, 664.079219, 415.777612, 327.657027, X, Y) && !ellipse(32208.677551, 37336.643616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24590.124260, 35005.332800, 529.516015, 529.516015, 0.000000, X, Y) && !ellipse(28543.151400, 32276.892000, 1506.920043, 1506.920043, 0.000000, X, Y) && !ellipse(25892.170000, 31673.046000, 1246.816036, 1246.816036, 0.000000, X, Y) && !ellipse(27174.301270, 31167.667114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26199.647980, 31089.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24077.541473, 30986.848999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24721.188000, 31334.478000, 1344.464039, 1344.464039, 0.000000, X, Y) && !ellipse(23847.913300, 30482.940369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.621613, 29698.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.727478, 28769.570312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32372.714000, 14947.872000, 1879.048054, 1879.048054, 0.000000, X, Y) && !ellipse(14767.937454, 29084.650604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22165.826000, 29123.432000, 1310.816038, 1310.816038, 0.000000, X, Y) && !ellipse(22607.996033, 28558.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.013275, 27724.256073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17109.298000, 27143.506000, 1656.096048, 1656.096048, 0.000000, X, Y) && !ellipse(34364.299600, 22890.704000, 1421.520041, 1421.520041, 0.000000, X, Y) && !ellipse(29223.601562, 22418.793335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.099960, 23278.888000, 1247.352036, 1247.352036, 0.000000, X, Y) && !ellipse(25277.229000, 22439.826000, 1701.104049, 1701.104049, 0.000000, X, Y) && !ellipse(28380.202000, 21564.882000, 1317.240038, 1317.240038, 0.000000, X, Y) && !ellipse(18878.611786, 21895.872040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30806.187531, 17780.040314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34678.282257, 17568.585815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.908000, 16522.516000, 1757.016051, 1757.016051, 0.000000, X, Y) && !ellipse(30435.548000, 17509.778000, 1658.056048, 1658.056048, 0.000000, X, Y) && !ellipse(31705.745972, 15870.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.663391, 42175.811523, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 18:30:14 2012] Writing fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8.gif
[Mon Feb 20 18:54:41 2012] Mean detx,y = (-1361.72, -3185.62) 
[Mon Feb 20 18:54:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 19:03:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 19:03:02 2012] Setting source spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Feb 20 19:03:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Feb 24 20:52:32 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:32 2012] Error reading totcts from fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Feb 24 20:52:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:36 2012] Using photon index=1.80, rate=0.0619, arf fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src8.arf
[Fri Feb 24 20:52:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:36 2012] Updating source flux to 2.2e-13
[Fri Feb 24 21:00:53 2012] Flag c found in src. 8 procflags, skipping spectral fitting