[Sun Feb 19 11:55:43 2012] Detection parameters:
  Position = (276.0, 261.8) = 15 11 6.57 5 41 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2860.0 +/- 68.0
  Background counts = 529.6
  Rate = 0.1 +/- 0.003

[Sun Feb 19 11:55:48 2012] Off-axis axis estimate = 3.11'
[Sun Feb 19 12:06:31 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 12:06:31 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Sun Feb 19 12:06:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.871
[Sun Feb 19 12:06:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.98"
[Mon Feb 20 02:42:26 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Feb 20 02:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3.csv
[Mon Feb 20 02:42:26 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Feb 20 02:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3.csv
[Mon Feb 20 02:42:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 02:42:27 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Feb 20 02:42:27 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Feb 20 02:42:27 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Feb 20 10:14:24 2012] Spatial fit model total counts = 5262.890000, observed total counts = 5265.000000
[Mon Feb 20 10:14:24 2012] Offset between fit and detection position for source 3 = 0.319214 pixels
[Mon Feb 20 10:14:24 2012] 5268.330000 total counts/ 3497.370000 bgd. counts: snr = 29.945941
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.319214 pixels
  Position = (275.8, 262.1) = 15 11 6.64 5 41 21.3
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 1771.0 +/- 72.6
  Background counts = 3497.4
  Rate = 0.05 +/- 0.002
[Mon Feb 20 10:14:24 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:24 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 10:14:24 2012] Source does appear to be extended
[Mon Feb 20 10:14:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:15:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:15:09 2012] Initial guess for spatial extent in simple fitting = 4.92"
[Mon Feb 20 10:15:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.127
[Mon Feb 20 10:15:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.92"
[Mon Feb 20 14:49:53 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb 20 14:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3.csv
[Mon Feb 20 14:49:53 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb 20 14:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3.csv
[Mon Feb 20 14:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb 20 14:49:55 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb 20 18:29:38 2012] Warning, spatial fit 3 centroid is now closest to src. 51
[Mon Feb 20 18:29:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:38 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 18:29:38 2012] Source does appear to be extended
[Mon Feb 20 18:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:30:13 2012] Counts = 1770.960000, rescaling region sizes by 2.000000
[Mon Feb 20 18:30:13 2012] XMMSAS src. selection expression = ellipse(23946.400020, 22750.650800, 590.804417, 590.804417, 0.000000, X, Y)
[Mon Feb 20 18:30:13 2012] Writing source region out to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb 20 18:30:13 2012] Extracting stamp from image fullrun_pn_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (242, 228) - (310, 296)
[Mon Feb 20 18:30:13 2012] XMMSAS bgd. selection expression = annulus(23946.400020, 22750.650800, 1969.348057, 3938.696113, X, Y) && !ellipse(26994.603000, 26800.413200, 6718.800193, 6718.800193, 0.000000, X, Y) && !ellipse(23141.529480, 25566.473938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.701400, 22691.764200, 432.896812, 303.234409, 3.141560, X, Y) && !ellipse(24004.318420, 26905.599030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24613.623749, 25426.360077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.249817, 26379.874023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.304108, 25951.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.435425, 23956.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.130000, 23400.330000, 812.832023, 812.832023, 0.000000, X, Y) && !ellipse(26469.099960, 23278.888000, 1247.352036, 1247.352036, 0.000000, X, Y) && !ellipse(25277.229000, 22439.826000, 1701.104049, 1701.104049, 0.000000, X, Y) && !ellipse(28380.202000, 21564.882000, 1317.240038, 1317.240038, 0.000000, X, Y)
[Mon Feb 20 18:30:13 2012] Writing fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3.gif
[Mon Feb 20 18:36:05 2012] Mean detx,y = (-4128.95, 3628.85) 
[Mon Feb 20 18:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 18:36:43 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 18:36:44 2012] Setting source spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 20 18:36:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Feb 24 20:52:32 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:32 2012] Error reading totcts from fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 24 20:52:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:36 2012] Using photon index=1.80, rate=0.0523, arf fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src3.arf
[Fri Feb 24 20:52:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:36 2012] Updating source flux to 2e-13