[Sun Feb 19 11:55:44 2012] Detection parameters:
  Position = (383.9, 438.9) = 15 10 35.12 5 54 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 359.6 +/- 29.8
  Background counts = 175.2
  Rate = 0.008 +/- 0.0007

[Sun Feb 19 11:55:48 2012] Off-axis axis estimate = 11.92'
[Sun Feb 19 12:06:31 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 12:06:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 12:06:31 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sun Feb 19 12:06:31 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Sun Feb 19 12:06:31 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.39"
[Mon Feb 20 02:42:26 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12.ximg exists
[Mon Feb 20 02:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12.csv
[Mon Feb 20 02:42:26 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Feb 20 02:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12.csv
[Mon Feb 20 02:42:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 02:42:27 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Feb 20 02:42:27 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Feb 20 02:42:27 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Feb 20 10:14:24 2012] Warning, spatial fit 12 centroid is now closest to src. 26
[Mon Feb 20 10:14:24 2012] Source 17 is offset by 3.003295 and -1.987092 pixels which is larger than
2 X fitted extent = 1.363448 x 1.363448, not incorporating fit results
[Mon Feb 20 10:14:24 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:24 2012] Assessing source extent using major
[Mon Feb 20 10:14:24 2012] Source does appear to be extended
[Mon Feb 20 10:14:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:15:09 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:15:09 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Mon Feb 20 10:15:09 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Mon Feb 20 10:15:09 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.39"
[Mon Feb 20 14:49:54 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src14.ximg exists
[Mon Feb 20 14:49:54 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Feb 20 14:49:54 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_src14 appears to have run properly
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Feb 20 14:49:55 2012] fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Feb 20 14:49:55 2012] Fit fullrun_pn_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Feb 20 18:29:38 2012] Warning, spatial fit 14 centroid is now closest to src. 26
[Mon Feb 20 18:29:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:38 2012] Assessing source extent using major
[Mon Feb 20 18:29:38 2012] Source does appear to be extended
[Mon Feb 20 18:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:30:15 2012] XMMSAS src. selection expression = ellipse(33351.744659, 38137.580994, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 18:30:15 2012] Writing source region out to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17_src.reg
[Mon Feb 20 18:30:15 2012] Extracting stamp from image fullrun_pn_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (346, 401) - (421, 476)
[Mon Feb 20 18:30:15 2012] XMMSAS bgd. selection expression = annulus(33351.744659, 38137.580994, 1087.500000, 2175.000000, X, Y) && !ellipse(32208.677551, 37336.643616, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 18:30:15 2012] Writing fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17.gif
[Mon Feb 20 19:21:39 2012] Mean detx,y = (10489.78, -6959.85) 
[Mon Feb 20 19:21:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 19:22:06 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 19:22:07 2012] Setting source spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 20 19:22:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Feb 22 20:36:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 20:36:00 2012] rmf not generated due to insufficient counts
[Fri Feb 24 20:52:33 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:33 2012] Error reading totcts from fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 24 20:52:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:36 2012] Using photon index=1.80, rate=0.00843, arf fullrun_pn_xmm0551780401_pi300-10000_pass1_cl_src17.arf
[Fri Feb 24 20:52:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:37 2012] Updating source flux to 4.2e-14
[Fri Feb 24 21:00:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting