[Sun Feb 19 11:57:12 2012] Detection parameters:
  Position = (281.4, 317.6) = 15 11 5.00 5 45 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 495.9 +/- 37.5
  Background counts = 370.1
  Rate = 0.01 +/- 0.001

[Sun Feb 19 11:57:15 2012] Off-axis axis estimate = 1.86'
[Mon Feb 20 04:46:38 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 04:46:38 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Feb 20 04:46:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.885
[Mon Feb 20 04:46:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.36"
[Mon Feb 20 10:13:59 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5.ximg exists
[Mon Feb 20 10:13:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5.csv
[Mon Feb 20 10:13:59 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Feb 20 10:13:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5.csv
[Mon Feb 20 10:13:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 10:14:00 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Feb 20 10:14:00 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Feb 20 10:14:00 2012] Fit fullrun_mos2_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Feb 20 10:14:48 2012] Source 4 is offset by -6.344077 and -1.140249 pixels which is larger than
2 X fitted extent = 4.553214 x 4.553214, not incorporating fit results
[Mon Feb 20 10:14:48 2012] Source 4 is offset by -5.506881 and -2.372516 pixels which is larger than
2 X fitted extent = 3.737894 x 3.737894, not incorporating fit results
[Mon Feb 20 10:14:48 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:48 2012] Assessing source extent using major
[Mon Feb 20 10:14:48 2012] Source does appear to be extended
[Mon Feb 20 10:14:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:14:48 2012] Source is confused with source 6
[Mon Feb 20 17:19:11 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:19:11 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Feb 20 17:19:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.885
[Mon Feb 20 17:19:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.36"
[Mon Feb 20 18:29:19 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5.ximg exists
[Mon Feb 20 18:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5.csv
[Mon Feb 20 18:29:19 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Feb 20 18:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5.csv
[Mon Feb 20 18:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:29:19 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Feb 20 18:29:19 2012] fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Feb 20 18:29:19 2012] Fit fullrun_mos2_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Feb 20 18:29:54 2012] Source 4 is offset by -6.344077 and -1.617698 pixels which is larger than
2 X fitted extent = 4.782437 x 4.782437, not incorporating fit results
[Mon Feb 20 18:29:54 2012] Source 4 is offset by -5.506881 and -2.421711 pixels which is larger than
2 X fitted extent = 3.812074 x 3.812074, not incorporating fit results
[Mon Feb 20 18:29:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:54 2012] Assessing source extent using major
[Mon Feb 20 18:29:54 2012] Source does appear to be extended
[Mon Feb 20 18:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 18:19:26 2012] XMMSAS src. selection expression = ellipse(24435.155334, 27582.111115, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 18:19:26 2012] Writing source region out to fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4_src.reg
[Fri Feb 24 18:19:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (244, 280) - (319, 355)
[Fri Feb 24 18:19:26 2012] XMMSAS bgd. selection expression = annulus(24435.155334, 27582.111115, 1087.500000, 2175.000000, X, Y) && !ellipse(26905.529000, 26697.012000, 5629.488162, 5629.488162, 0.000000, X, Y) && !ellipse(28041.402000, 27485.656000, 3506.328101, 3506.328101, 0.000000, X, Y) && !ellipse(24304.180084, 28024.441650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.016000, 24550.844000, 1174.688034, 1174.688034, 0.000000, X, Y) && !ellipse(24501.844360, 29002.546478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.336945, 30053.019440, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 18:19:26 2012] Writing fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4.gif
[Fri Feb 24 18:44:49 2012] Mean detx,y = (1876.09, 421.79) 
[Fri Feb 24 18:44:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 18:45:15 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 18:45:15 2012] Setting source spectrum file to fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 18:45:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Feb 24 20:26:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 24 20:26:51 2012] rmf not generated due to insufficient counts
[Fri Feb 24 20:52:43 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:43 2012] Error reading totcts from fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 20:52:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:43 2012] Using photon index=1.80, rate=0.0131, arf fullrun_mos2_xmm0551780401_pi300-10000_pass1_cl_src4.arf
[Fri Feb 24 20:52:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:43 2012] Updating source flux to 1.4e-13
[Fri Feb 24 20:58:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting