[Sun Feb 19 11:56:33 2012] Detection parameters:
  Position = (313.7, 267.1) = 15 10 55.60 5 41 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 454.5 +/- 46.1
  Background counts = 400.2
  Rate = 0.01 +/- 0.001

[Sun Feb 19 11:56:35 2012] Off-axis axis estimate = 2.53'
[Mon Feb 20 02:42:28 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:42:28 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Feb 20 02:42:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.923
[Mon Feb 20 02:42:28 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.69"
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7.csv
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7.csv
[Mon Feb 20 04:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Feb 20 04:46:37 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Feb 20 10:14:37 2012] Source 7 is offset by 5.242111 and -7.998881 pixels which is larger than
2 X fitted extent = 7.073471 x 7.073471, not incorporating fit results
[Mon Feb 20 10:14:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:37 2012] Assessing source extent using major
[Mon Feb 20 10:14:37 2012] Source does appear to be extended
[Mon Feb 20 10:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:14:37 2012] Source is confused with source 4
[Mon Feb 20 14:49:57 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:49:57 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Feb 20 14:49:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.923
[Mon Feb 20 14:49:57 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.69"
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7.csv
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7.csv
[Mon Feb 20 17:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Feb 20 17:19:10 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Feb 20 18:29:49 2012] Source 7 is offset by 5.480226 and -8.003594 pixels which is larger than
2 X fitted extent = 7.073471 x 7.073471, not incorporating fit results
[Mon Feb 20 18:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:49 2012] Assessing source extent using major
[Mon Feb 20 18:29:49 2012] Source does appear to be extended
[Mon Feb 20 18:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:47:44 2012] XMMSAS src. selection expression = ellipse(27239.455688, 23186.577362, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:47:44 2012] Writing source region out to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7_src.reg
[Wed Feb 22 21:47:44 2012] Extracting stamp from image fullrun_mos1_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (276, 230) - (351, 305)
[Wed Feb 22 21:47:44 2012] XMMSAS bgd. selection expression = annulus(27239.455688, 23186.577362, 1087.500000, 2175.000000, X, Y) && !ellipse(27007.695526, 26665.419769, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27653.706635, 23312.919586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28972.268000, 24465.390000, 1132.400033, 1132.400033, 0.000000, X, Y) && !ellipse(27693.048000, 22651.398000, 272.082408, 272.082408, 0.000000, X, Y) && !ellipse(25886.689056, 23976.968964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29361.245200, 23356.279800, 629.667218, 629.667218, 0.000000, X, Y) && !ellipse(28316.178925, 23130.386322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.252000, 23776.318000, 1154.632033, 1154.632033, 0.000000, X, Y)
[Wed Feb 22 21:47:44 2012] Writing fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7.gif
[Wed Feb 22 22:01:01 2012] Mean detx,y = (-4388.78, -1169.88) 
[Wed Feb 22 22:01:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:01:18 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:01:18 2012] Setting source spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Feb 22 22:01:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Feb 22 22:50:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 22:50:32 2012] rmf not generated due to insufficient counts
[Fri Feb 24 20:52:39 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:39 2012] Error reading totcts from fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 24 20:52:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:41 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src7.arf
[Fri Feb 24 20:52:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:41 2012] Updating source flux to 1.7e-13
[Fri Feb 24 20:52:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting