[Sun Feb 19 11:56:35 2012] Detection parameters:
  Position = (288.5, 279.1) = 15 11 2.93 5 42 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.0 +/- 31.9
  Background counts = 391.8
  Rate = 0.004 +/- 0.0008

[Sun Feb 19 11:56:35 2012] Off-axis axis estimate = 1.58'
[Mon Feb 20 02:42:28 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:42:28 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Mon Feb 20 02:42:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.073
[Mon Feb 20 02:42:28 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.22"
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27.csv
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27.csv
[Mon Feb 20 04:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Feb 20 04:46:37 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Feb 20 10:14:37 2012] Spatial fit model total counts = 5041.320000, observed total counts = 5046.000000
[Mon Feb 20 10:14:37 2012] Offset between fit and detection position for source 44 = 8.047939 pixels
[Mon Feb 20 10:14:37 2012] 5220.310000 total counts/ 4995.260000 bgd. counts: snr = 3.184197
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 8.047939 pixels
  Position = (282.4, 273.8) = 15 11 4.71 5 42 12.5
  Extent = 14.4 (14.4-28.9)", rotation angle = 0
  Source counts = 225.1 +/- 72.3
  Background counts = 4995.3
  Rate = 0.005 +/- 0.002
[Mon Feb 20 10:14:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:37 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 10:14:37 2012] Source does appear to be extended
[Mon Feb 20 10:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 14:49:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:49:57 2012] Initial guess for spatial extent in simple fitting = 14.43"
[Mon Feb 20 14:49:57 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.960
[Mon Feb 20 14:49:57 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 14.43"
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27.csv
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27.csv
[Mon Feb 20 17:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Feb 20 17:19:10 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Feb 20 18:29:49 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.809606 pixels away
[Mon Feb 20 18:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 18:29:49 2012] Source does appear to be extended
[Mon Feb 20 18:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:47:44 2012] XMMSAS src. selection expression = ellipse(24522.252000, 23776.318000, 865.974025, 865.974025, 0.000000, X, Y)
[Wed Feb 22 21:47:44 2012] Writing source region out to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44_src.reg
[Wed Feb 22 21:47:44 2012] Extracting stamp from image fullrun_mos1_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (233, 224) - (332, 324)
[Wed Feb 22 21:47:45 2012] XMMSAS bgd. selection expression = annulus(24522.252000, 23776.318000, 1443.290042, 2886.580083, X, Y) && !ellipse(27007.695526, 26665.419769, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23952.097540, 22747.046200, 417.594412, 351.390410, 358.436450, X, Y) && !ellipse(27653.706635, 23312.919586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27239.455688, 23186.577362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25886.689056, 23976.968964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.114624, 25511.852020, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:47:45 2012] Writing fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44.gif
[Wed Feb 22 22:11:56 2012] Mean detx,y = (-2840.17, -3391.95) 
[Wed Feb 22 22:11:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:12:16 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:12:16 2012] Setting source spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Feb 22 22:12:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Feb 24 20:52:40 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:40 2012] Error reading totcts from fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Feb 24 20:52:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:42 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src44.arf
[Fri Feb 24 20:52:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:42 2012] Updating source flux to 5.3e-14