[Sun Feb 19 11:56:35 2012] Detection parameters:
  Position = (276.1, 293.8) = 15 11 6.55 5 43 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.9 +/- 28.6
  Background counts = 331.0
  Rate = 0.003 +/- 0.0007

[Sun Feb 19 11:56:35 2012] Off-axis axis estimate = 1.65'
[Mon Feb 20 02:42:28 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:42:28 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Feb 20 02:42:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon Feb 20 02:42:28 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.26"
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31.ximg exists
[Mon Feb 20 04:46:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Feb 20 04:46:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 04:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Feb 20 04:46:37 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Feb 20 10:14:37 2012] Source 43 is offset by -6.584659 and -5.630023 pixels which is larger than
2 X fitted extent = 2.519568 x 2.519568, not incorporating fit results
[Mon Feb 20 10:14:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:37 2012] Assessing source extent using major
[Mon Feb 20 10:14:37 2012] Source does appear to be extended
[Mon Feb 20 10:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 14:49:57 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:49:57 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Feb 20 14:49:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon Feb 20 14:49:57 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.26"
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src30.ximg exists
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Feb 20 17:19:09 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src30 appears to have run properly
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Feb 20 17:19:10 2012] Fit fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Feb 20 18:29:49 2012] Source 43 is offset by 6.369524 and 6.469334 pixels which is larger than
2 X fitted extent = 2.108851 x 2.108851, not incorporating fit results
[Mon Feb 20 18:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:49 2012] Assessing source extent using major
[Mon Feb 20 18:29:49 2012] Source does appear to be extended
[Mon Feb 20 18:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:47:45 2012] XMMSAS src. selection expression = ellipse(23971.114624, 25511.852020, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:47:45 2012] Writing source region out to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43_src.reg
[Wed Feb 22 21:47:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (239, 256) - (314, 331)
[Wed Feb 22 21:47:45 2012] XMMSAS bgd. selection expression = annulus(23971.114624, 25511.852020, 1087.500000, 2175.000000, X, Y) && !ellipse(27007.695526, 26665.419769, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25886.689056, 23976.968964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24160.083679, 27884.224243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.252000, 23776.318000, 1154.632033, 1154.632033, 0.000000, X, Y)
[Wed Feb 22 21:47:45 2012] Writing fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43.gif
[Wed Feb 22 22:26:37 2012] Mean detx,y = (-1042.69, -3268.81) 
[Wed Feb 22 22:26:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:26:52 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:26:52 2012] Setting source spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Feb 22 22:26:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Feb 24 18:13:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 24 18:13:19 2012] rmf not generated due to insufficient counts
[Fri Feb 24 20:52:40 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:41 2012] Error reading totcts from fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Feb 24 20:52:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:42 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src43.arf
[Fri Feb 24 20:52:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:42 2012] Updating source flux to 3.6e-14
[Fri Feb 24 20:52:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting