[Sun Feb 19 11:56:32 2012] Detection parameters:
  Position = (311.0, 307.1) = 15 10 56.38 5 44 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36075.3 +/- 232.8
  Background counts = 569.4
  Rate = 0.8 +/- 0.005

[Sun Feb 19 11:56:35 2012] Off-axis axis estimate = 1.10'
[Mon Feb 20 02:42:28 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:42:28 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon Feb 20 02:42:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Mon Feb 20 02:42:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.98"
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 04:46:36 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 20 04:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 04:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 04:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Feb 20 04:46:37 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 04:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Feb 20 04:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 10:14:37 2012] Spatial fit model total counts = 91597.100000, observed total counts = 102473.000000
[Mon Feb 20 10:14:37 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 20 10:14:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:14:37 2012] Assessing source extent using major
[Mon Feb 20 10:14:37 2012] Source does appear to be extended
[Mon Feb 20 10:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 14:49:57 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:49:57 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon Feb 20 14:49:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Mon Feb 20 14:49:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.98"
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1.csv
[Mon Feb 20 17:19:09 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 20 17:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1.csv
[Mon Feb 20 17:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 20 17:19:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Feb 20 17:19:10 2012] fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 20 17:19:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Feb 20 17:19:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:29:49 2012] Spatial fit model total counts = 91623.200000, observed total counts = 102473.000000
[Mon Feb 20 18:29:49 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 20 18:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:29:49 2012] Assessing source extent using major
[Mon Feb 20 18:29:49 2012] Source does appear to be extended
[Mon Feb 20 18:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:47:44 2012] Counts = 36075.257812, rescaling region sizes by 3.000000
[Wed Feb 22 21:47:44 2012] XMMSAS src. selection expression = ellipse(27007.695526, 26665.419769, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Feb 22 21:47:44 2012] Writing source region out to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 22 21:47:44 2012] Extracting stamp from image fullrun_mos1_xmm0551780401_pi300-10000_cl_sm2.00.img.gz, (198, 195) - (423, 420)
[Wed Feb 22 21:47:44 2012] XMMSAS bgd. selection expression = annulus(27007.695526, 26665.419769, 9787.500000, 19575.000000, X, Y) && !ellipse(23952.097540, 22747.046200, 417.594412, 351.390410, 358.436450, X, Y) && !ellipse(27653.706635, 23312.919586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15808.117000, 28034.418280, 473.763214, 473.763214, 0.000000, X, Y) && !ellipse(25620.594000, 29653.836000, 1321.328038, 1321.328038, 0.000000, X, Y) && !ellipse(27239.455688, 23186.577362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28972.268000, 24465.390000, 1132.400033, 1132.400033, 0.000000, X, Y) && !ellipse(26605.712000, 30106.192000, 1346.712039, 1346.712039, 0.000000, X, Y) && !ellipse(27693.048000, 22651.398000, 272.082408, 272.082408, 0.000000, X, Y) && !ellipse(32665.300110, 30992.015686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.248000, 29901.084000, 1261.168036, 1261.168036, 0.000000, X, Y) && !ellipse(24480.364400, 29175.221000, 520.547215, 520.547215, 0.000000, X, Y) && !ellipse(28524.765991, 29343.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25886.689056, 23976.968964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.005120, 32191.082000, 371.320011, 371.320011, 0.000000, X, Y) && !ellipse(33344.207031, 38129.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24160.083679, 27884.224243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23765.856964, 28844.274872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.447937, 37309.097687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.630493, 39260.398193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.368000, 30797.260400, 1346.712039, 1346.712039, 0.000000, X, Y) && !ellipse(25069.670166, 30224.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29361.245200, 23356.279800, 629.667218, 629.667218, 0.000000, X, Y) && !ellipse(28316.178925, 23130.386322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.252000, 23776.318000, 1154.632033, 1154.632033, 0.000000, X, Y) && !ellipse(24601.018000, 30564.940000, 2642.656076, 2642.656076, 0.000000, X, Y) && !ellipse(42568.370880, 31100.348846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.114624, 25511.852020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28116.176000, 31227.668000, 2521.536073, 2521.536073, 0.000000, X, Y) && !ellipse(24223.493744, 29796.331207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16147.255707, 22750.053375, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:47:44 2012] Writing fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1.gif
[Wed Feb 22 21:48:27 2012] Mean detx,y = (-1084.67, -22.80) 
[Wed Feb 22 21:48:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 21:58:56 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 21:58:56 2012] Setting source spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 21:58:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Feb 22 22:30:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 22:30:59 2012] rmf not generated due to insufficient counts
[Fri Feb 24 20:52:38 2012] Updating aperture counts using extracted products
[Fri Feb 24 20:52:38 2012] Error reading totcts from fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 20:52:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 20:52:41 2012] Using photon index=1.80, rate=0.804, arf fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 20:52:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 20:52:41 2012] Updating source flux to 6.8e-12
[Fri Feb 24 20:52:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Feb 24 20:58:33 2012] xmm0551780401/analysis//spectral/fullrun_mos1_xmm0551780401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete