[Wed Mar 14 22:07:24 2012] Detection parameters:
  Position = (275.6, 261.9) = 15 11 6.58 5 41 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1979.7 +/- 58.8
  Background counts = 474.2
  Rate = 0.08 +/- 0.002

[Wed Mar 14 22:07:26 2012] Off-axis axis estimate = 3.12'
[Wed Mar 14 22:15:52 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 22:15:52 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Mar 14 22:15:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Wed Mar 14 22:15:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.99"
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 01:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar 15 01:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar 15 01:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Mar 15 01:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:52 2012] Warning, spatial fit 4 centroid is now closest to src. 34
[Thu Mar 15 16:49:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:49:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:49:52 2012] Assessing source extent using major
[Thu Mar 15 16:49:52 2012] Source does appear to be extended
[Thu Mar 15 16:49:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:26 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 16:50:26 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Mar 15 16:50:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Thu Mar 15 16:50:26 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.99"
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4.csv
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4.csv
[Thu Mar 15 22:07:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Mar 15 22:07:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:04 2012] Spatial fit model total counts = -9856.280000, observed total counts = 5295.000000
[Fri Mar 16 10:54:04 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 10:54:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:05 2012] Assessing source extent using major
[Fri Mar 16 10:54:05 2012] Source does appear to be extended
[Fri Mar 16 10:54:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:42 2012] Counts = 1979.678467, rescaling region sizes by 2.000000
[Fri Mar 16 10:54:42 2012] XMMSAS src. selection expression = ellipse(23926.658813, 22740.328003, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 16 10:54:42 2012] Writing source region out to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 10:54:42 2012] Extracting stamp from image fullrun_pn_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (201, 187) - (351, 337)
[Fri Mar 16 10:54:42 2012] XMMSAS bgd. selection expression = annulus(23926.658813, 22740.328003, 4350.000000, 8700.000000, X, Y) && !ellipse(27131.108600, 26751.171000, 3357.984097, 3357.984097, 0.000000, X, Y) && !ellipse(15780.116180, 28020.988600, 439.774413, 439.774413, 0.000000, X, Y) && !ellipse(25858.641327, 29131.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.660400, 29513.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32637.427612, 30954.250549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22868.074738, 27807.740814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16122.504196, 22805.633759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.342400, 22672.273000, 315.107209, 315.107209, 0.000000, X, Y) && !ellipse(25349.252716, 31651.939148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.466003, 32220.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.227966, 31616.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20660.285126, 13444.483673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29686.508575, 29286.212463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14751.960815, 29123.268005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29838.893982, 28854.225922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.755493, 28465.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.615784, 27213.802795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.283300, 26838.126000, 1123.160032, 1123.160032, 0.000000, X, Y) && !ellipse(32304.328000, 14538.400000, 1847.672053, 1847.672053, 0.000000, X, Y) && !ellipse(23288.137543, 26321.978455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24311.043335, 25942.845581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.020000, 25662.504000, 1177.152034, 1177.152034, 0.000000, X, Y) && !ellipse(24637.195099, 25173.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.532043, 24483.933533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.997345, 23952.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.706238, 23798.349213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18798.369000, 21934.064000, 406.881612, 406.881612, 0.000000, X, Y) && !ellipse(32042.780701, 15260.075012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31605.714000, 15745.272000, 1821.408052, 1821.408052, 0.000000, X, Y) && !ellipse(27802.359070, 31480.835785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.372375, 31249.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23421.735962, 30866.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23187.195984, 30403.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17107.714000, 27057.196000, 1660.856048, 1660.856048, 0.000000, X, Y) && !ellipse(30203.041870, 19152.086441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30556.930000, 18676.974000, 1562.432045, 1562.432045, 0.000000, X, Y) && !ellipse(30846.330000, 17620.982000, 3401.424098, 3401.424098, 0.000000, X, Y) && !ellipse(31073.988000, 16826.326000, 3642.816105, 3642.816105, 0.000000, X, Y)
[Fri Mar 16 10:54:42 2012] Writing fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 11:20:45 2012] Mean detx,y = (-4033.35, 3548.78) 
[Fri Mar 16 11:20:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:23:21 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:23:21 2012] Setting source spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:23:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 20:09:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 20:09:42 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:25 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:25 2012] Error reading totcts from fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 19 05:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:26 2012] Using photon index=1.80, rate=0.0786, arf fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src4.arf
[Mon Mar 19 05:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:27 2012] Updating source flux to 2.6e-13
[Mon Mar 19 05:39:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting