[Wed Mar 14 22:07:24 2012] Detection parameters:
  Position = (297.8, 335.4) = 15 11 0.11 5 46 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2773.9 +/- 94.5
  Background counts = 771.0
  Rate = 0.09 +/- 0.003

[Wed Mar 14 22:07:26 2012] Off-axis axis estimate = 2.68'
[Wed Mar 14 22:15:52 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 22:15:52 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Wed Mar 14 22:15:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.100
[Wed Mar 14 22:15:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.77"
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 01:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 15 01:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 15 01:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 15 01:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:52 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu Mar 15 16:49:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:49:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:49:52 2012] Assessing source extent using major
[Thu Mar 15 16:49:52 2012] Source does appear to be extended
[Thu Mar 15 16:49:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:26 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 16:50:26 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Mar 15 16:50:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.100
[Thu Mar 15 16:50:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.77"
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 22:07:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Mar 15 22:07:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 30.878126 pixels away
[Fri Mar 16 10:54:04 2012] Spatial fit model total counts = -9856.400000, observed total counts = 16886.000000
[Fri Mar 16 10:54:04 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 10:54:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:05 2012] Assessing source extent using major
[Fri Mar 16 10:54:05 2012] Source does appear to be extended
[Fri Mar 16 10:54:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:42 2012] Counts = 2773.864502, rescaling region sizes by 2.000000
[Fri Mar 16 10:54:42 2012] XMMSAS src. selection expression = ellipse(25858.641327, 29131.193268, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 16 10:54:42 2012] Writing source region out to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3_src.reg
[Fri Mar 16 10:54:42 2012] Extracting stamp from image fullrun_pn_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (223, 260) - (373, 410)
[Fri Mar 16 10:54:42 2012] XMMSAS bgd. selection expression = annulus(25858.641327, 29131.193268, 4350.000000, 8700.000000, X, Y) && !ellipse(27131.108600, 26751.171000, 3357.984097, 3357.984097, 0.000000, X, Y) && !ellipse(23926.658813, 22740.328003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.660400, 29513.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32637.427612, 30954.250549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22868.074738, 27807.740814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.342400, 22672.273000, 315.107209, 315.107209, 0.000000, X, Y) && !ellipse(25349.252716, 31651.939148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.370361, 38140.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24639.969604, 35003.743713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.466003, 32220.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.227966, 31616.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29686.508575, 29286.212463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29838.893982, 28854.225922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.755493, 28465.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.615784, 27213.802795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.283300, 26838.126000, 1123.160032, 1123.160032, 0.000000, X, Y) && !ellipse(23288.137543, 26321.978455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24311.043335, 25942.845581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.020000, 25662.504000, 1177.152034, 1177.152034, 0.000000, X, Y) && !ellipse(24637.195099, 25173.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.532043, 24483.933533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.997345, 23952.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.706238, 23798.349213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18798.369000, 21934.064000, 406.881612, 406.881612, 0.000000, X, Y) && !ellipse(32180.582031, 37318.347809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.359070, 31480.835785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.372375, 31249.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23421.735962, 30866.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23187.195984, 30403.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17107.714000, 27057.196000, 1660.856048, 1660.856048, 0.000000, X, Y) && !ellipse(34490.746918, 23007.795654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30846.330000, 17620.982000, 3401.424098, 3401.424098, 0.000000, X, Y) && !ellipse(31073.988000, 16826.326000, 3642.816105, 3642.816105, 0.000000, X, Y)
[Fri Mar 16 10:54:42 2012] Writing fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3.gif
[Fri Mar 16 11:16:25 2012] Mean detx,y = (177.17, -1118.50) 
[Fri Mar 16 11:16:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:19:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:19:53 2012] Setting source spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 16 11:19:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Mar 16 19:32:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 19:32:23 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:25 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:25 2012] Error reading totcts from fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 19 05:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:26 2012] Using photon index=1.80, rate=0.0947, arf fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src3.arf
[Mon Mar 19 05:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:26 2012] Updating source flux to 2.3e-13
[Mon Mar 19 05:39:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting