[Wed Mar 14 22:07:25 2012] Detection parameters:
  Position = (268.2, 303.1) = 15 11 8.72 5 44 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.5 +/- 38.1
  Background counts = 583.3
  Rate = 0.01 +/- 0.001

[Wed Mar 14 22:07:26 2012] Off-axis axis estimate = 2.22'
[Wed Mar 14 22:15:52 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 22:15:52 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Mar 14 22:15:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Wed Mar 14 22:15:52 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.54"
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25.csv
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25.csv
[Thu Mar 15 01:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Mar 15 01:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Mar 15 01:48:24 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Mar 15 01:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Mar 15 01:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:52 2012] Source 28 is offset by 7.167167 and 6.038902 pixels which is larger than
2 X fitted extent = 0.866244 x 0.866244, not incorporating fit results
[Thu Mar 15 16:49:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:49:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:49:52 2012] Assessing source extent using major
[Thu Mar 15 16:49:52 2012] Source does appear to be extended
[Thu Mar 15 16:49:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:26 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 16:50:26 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Mar 15 16:50:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Thu Mar 15 16:50:26 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.54"
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src24.ximg exists
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Mar 15 22:07:45 2012] Fit fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src24 appears to have run properly
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Mar 15 22:07:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Mar 15 22:07:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:05 2012] Source 28 is offset by 0.017374 and -4.038684 pixels which is larger than
2 X fitted extent = 0.856543 x 0.856543, not incorporating fit results
[Fri Mar 16 10:54:05 2012] Spatial fit model total counts = 31281.200000, observed total counts = 28281.000000
[Fri Mar 16 10:54:05 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 10:54:05 2012] Warning, spatial fit 24 centroid is now closest to src. 29
[Fri Mar 16 10:54:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:05 2012] Assessing source extent using major
[Fri Mar 16 10:54:05 2012] Source does appear to be extended
[Fri Mar 16 10:54:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:05 2012] Source is confused with source 30
[Fri Mar 16 10:54:43 2012] XMMSAS src. selection expression = ellipse(23288.137543, 26321.978455, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 10:54:43 2012] Writing source region out to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28_src.reg
[Fri Mar 16 10:54:43 2012] Extracting stamp from image fullrun_pn_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (231, 266) - (306, 341)
[Fri Mar 16 10:54:43 2012] XMMSAS bgd. selection expression = annulus(23288.137543, 26321.978455, 1087.500000, 2175.000000, X, Y) && !ellipse(27131.108600, 26751.171000, 3357.984097, 3357.984097, 0.000000, X, Y) && !ellipse(25858.641327, 29131.193268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22868.074738, 27807.740814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22552.755493, 28465.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.615784, 27213.802795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.283300, 26838.126000, 1123.160032, 1123.160032, 0.000000, X, Y) && !ellipse(24311.043335, 25942.845581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.020000, 25662.504000, 1177.152034, 1177.152034, 0.000000, X, Y) && !ellipse(24637.195099, 25173.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.532043, 24483.933533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.997345, 23952.168335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.706238, 23798.349213, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 10:54:43 2012] Writing fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28.gif
[Fri Mar 16 11:51:08 2012] Mean detx,y = (-3182.93, 81.60) 
[Fri Mar 16 11:51:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:51:37 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:51:38 2012] Setting source spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Mar 16 11:51:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Mar 16 21:09:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 21:09:49 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:25 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:25 2012] Error reading totcts from fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Mar 19 05:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:27 2012] Using photon index=1.80, rate=0.00974, arf fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src28.arf
[Mon Mar 19 05:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:28 2012] Updating source flux to 3.1e-14
[Mon Mar 19 05:39:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting