[Wed Mar 14 22:07:24 2012] Detection parameters:
  Position = (383.6, 439.0) = 15 10 35.09 5 54 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.3 +/- 28.5
  Background counts = 132.6
  Rate = 0.009 +/- 0.0007

[Wed Mar 14 22:07:26 2012] Off-axis axis estimate = 11.91'
[Wed Mar 14 22:15:52 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 22:15:52 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Wed Mar 14 22:15:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.937
[Wed Mar 14 22:15:52 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.38"
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13.csv
[Thu Mar 15 01:48:22 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Mar 15 01:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13.csv
[Thu Mar 15 01:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Mar 15 01:48:23 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Mar 15 01:48:23 2012] Fit fullrun_pn_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Mar 15 16:49:52 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.439625 pixels away
[Thu Mar 15 16:49:52 2012] Source 14 is offset by 7.378556 and -1.527945 pixels which is larger than
2 X fitted extent = 1.362032 x 1.362032, not incorporating fit results
[Thu Mar 15 16:49:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:49:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:49:52 2012] Assessing source extent using major
[Thu Mar 15 16:49:52 2012] Source does appear to be extended
[Thu Mar 15 16:49:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:26 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 16:50:26 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Mar 15 16:50:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.937
[Thu Mar 15 16:50:26 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.38"
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13.csv
[Thu Mar 15 22:07:45 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Mar 15 22:07:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13.csv
[Thu Mar 15 22:07:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Mar 15 22:07:46 2012] fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Mar 15 22:07:46 2012] Fit fullrun_pn_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Mar 16 10:54:04 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.915147 pixels away
[Fri Mar 16 10:54:05 2012] Source 14 is offset by 5.549521 and 0.915458 pixels which is larger than
2 X fitted extent = 1.004400 x 1.004400, not incorporating fit results
[Fri Mar 16 10:54:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:05 2012] Assessing source extent using major
[Fri Mar 16 10:54:05 2012] Source does appear to be extended
[Fri Mar 16 10:54:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:43 2012] XMMSAS src. selection expression = ellipse(33323.370361, 38140.206818, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 10:54:43 2012] Writing source region out to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14_src.reg
[Fri Mar 16 10:54:43 2012] Extracting stamp from image fullrun_pn_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (346, 401) - (421, 476)
[Fri Mar 16 10:54:43 2012] XMMSAS bgd. selection expression = annulus(33323.370361, 38140.206818, 1087.500000, 2175.000000, X, Y) && !ellipse(32180.582031, 37318.347809, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 10:54:43 2012] Writing fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14.gif
[Fri Mar 16 11:38:01 2012] Mean detx,y = (10563.33, -6792.08) 
[Fri Mar 16 11:38:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:38:28 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:38:29 2012] Setting source spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 16 11:38:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Mar 16 20:54:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 20:54:20 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:25 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:25 2012] Error reading totcts from fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Mar 19 05:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:27 2012] Using photon index=1.80, rate=0.00866, arf fullrun_pn_xmm0551780301_pi300-10000_pass1_cl_src14.arf
[Mon Mar 19 05:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:27 2012] Updating source flux to 4.4e-14
[Mon Mar 19 05:39:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting