[Wed Mar 14 22:08:38 2012] Detection parameters:
  Position = (342.1, 283.1) = 15 10 47.21 5 42 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.8 +/- 37.1
  Background counts = 393.2
  Rate = 0.009 +/- 0.0009

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 3.35'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.716
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.10"
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10.csv
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10.csv
[Thu Mar 15 16:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Mar 15 16:49:38 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Mar 15 16:50:08 2012] Source 9 is offset by 7.503881 and -5.561837 pixels which is larger than
2 X fitted extent = 7.425380 x 7.425380, not incorporating fit results
[Thu Mar 15 16:50:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:08 2012] Assessing source extent using major
[Thu Mar 15 16:50:08 2012] Source does appear to be extended
[Thu Mar 15 16:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:08 2012] Source is confused with source 20
[Thu Mar 15 16:50:08 2012] Source is confused with source 40
[Thu Mar 15 23:55:54 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 23:55:54 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Mar 15 23:55:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.716
[Thu Mar 15 23:55:54 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.10"
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10.csv
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10.csv
[Fri Mar 16 10:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:53:47 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Mar 16 10:53:47 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Mar 16 10:53:47 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Mar 16 10:54:23 2012] Warning, spatial fit 10 centroid is now closest to src. 40
[Fri Mar 16 10:54:23 2012] Spatial fit model total counts = 4943.810000, observed total counts = 4942.000000
[Fri Mar 16 10:54:23 2012] Offset between fit and detection position for source 9 = 3.104859 pixels
[Fri Mar 16 10:54:23 2012] Warning, changing simple spatial fit ID from 10 to 25
[Fri Mar 16 10:54:23 2012] 4721.149000 total counts/ 4402.330000 bgd. counts: snr = 4.805105
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.104859 pixels
  Position = (339.3, 284.6) = 15 10 48.00 5 43 0.0
  Extent = 16.6 (16.5-33.1)", rotation angle = 0
  Source counts = 318.8 +/- 68.7
  Background counts = 4402.3
  Rate = 0.007 +/- 0.001
[Fri Mar 16 10:54:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:23 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:54:23 2012] Source does appear to be extended
[Fri Mar 16 10:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 02:49:26 2012] XMMSAS src. selection expression = ellipse(29472.592000, 24711.972000, 993.744029, 993.744029, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing source region out to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9_src.reg
[Mon Mar 19 02:49:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (282, 227) - (396, 342)
[Mon Mar 19 02:49:26 2012] XMMSAS bgd. selection expression = annulus(29472.592000, 24711.972000, 1656.240048, 3312.480095, X, Y) && !ellipse(27002.104034, 26665.172852, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27697.522583, 27024.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25419.034000, 24717.662000, 1171.064034, 1171.064034, 0.000000, X, Y) && !ellipse(27634.208100, 22692.485200, 265.327208, 265.327208, 0.000000, X, Y) && !ellipse(24576.910000, 24028.374000, 2218.512064, 2218.512064, 0.000000, X, Y) && !ellipse(26660.269012, 23033.337036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28997.478000, 24078.656000, 1303.240038, 1303.240038, 0.000000, X, Y) && !ellipse(30425.850000, 28263.092000, 1322.704038, 1322.704038, 0.000000, X, Y) && !ellipse(26659.087524, 22608.203125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30338.960785, 25587.419464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.989685, 24061.807770, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9.gif
[Mon Mar 19 03:06:01 2012] Mean detx,y = (-1485.38, -3983.64) 
[Mon Mar 19 03:06:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 03:06:26 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 03:06:26 2012] Setting source spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 19 03:06:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 19 05:35:31 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:31 2012] Error reading totcts from fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 19 05:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:31 2012] Using photon index=1.80, rate=0.00685, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src9.arf
[Mon Mar 19 05:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:31 2012] Updating source flux to 6.3e-14
[Mon Mar 19 05:38:21 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon Mar 19 05:38:21 2012] Flag c found in src. 9 procflags, skipping spectral fitting