[Wed Mar 14 22:08:38 2012] Detection parameters:
  Position = (181.7, 322.8) = 15 11 33.95 5 45 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 654.8 +/- 31.1
  Background counts = 32.0
  Rate = 0.01 +/- 0.0007

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 8.65'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Thu Mar 15 03:46:28 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.75"
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6.csv
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6.csv
[Thu Mar 15 16:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Mar 15 16:49:38 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Mar 15 16:50:08 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.427915 pixels away
[Thu Mar 15 16:50:08 2012] Source 6 is offset by 1.567403 and -2.807688 pixels which is larger than
2 X fitted extent = 1.402115 x 1.402115, not incorporating fit results
[Thu Mar 15 16:50:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:08 2012] Assessing source extent using major
[Thu Mar 15 16:50:08 2012] Source does appear to be extended
[Thu Mar 15 16:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 23:55:54 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 23:55:54 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Thu Mar 15 23:55:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Thu Mar 15 23:55:54 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.75"
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Mar 16 10:53:46 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Mar 16 10:53:46 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Mar 16 10:54:23 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.062829 pixels away
[Fri Mar 16 10:54:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:23 2012] Assessing source extent using major
[Fri Mar 16 10:54:23 2012] Source does appear to be extended
[Fri Mar 16 10:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 02:49:26 2012] XMMSAS src. selection expression = ellipse(15756.588058, 28037.037109, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing source region out to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6_src.reg
[Mon Mar 19 02:49:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (144, 285) - (219, 360)
[Mon Mar 19 02:49:26 2012] XMMSAS bgd. selection expression = annulus(15756.588058, 28037.037109, 1087.500000, 2175.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6.gif
[Mon Mar 19 03:04:33 2012] Mean detx,y = (9733.83, 4252.38) 
[Mon Mar 19 03:04:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 03:04:47 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 03:04:47 2012] Setting source spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 19 03:04:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Mar 19 03:36:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 03:36:24 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:30 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:30 2012] Error reading totcts from fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 19 05:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:31 2012] Using photon index=1.80, rate=0.0141, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src6.arf
[Mon Mar 19 05:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:31 2012] Updating source flux to 2.9e-13
[Mon Mar 19 05:38:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting