[Wed Mar 14 22:08:39 2012] Detection parameters:
  Position = (293.2, 265.3) = 15 11 1.45 5 41 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.0 +/- 27.3
  Background counts = 295.3
  Rate = 0.004 +/- 0.0007

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 2.43'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.65"
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Mar 15 16:49:38 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Mar 15 16:50:08 2012] Spatial fit model total counts = 6394.600000, observed total counts = 6395.000000
[Thu Mar 15 16:50:08 2012] Offset between fit and detection position for source 42 = 0.106611 pixels
[Thu Mar 15 16:50:08 2012] Warning, changing simple spatial fit ID from 23 to 13
[Thu Mar 15 16:50:08 2012] 6583.948700 total counts/ 6543.500000 bgd. counts: snr = 0.500034
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.106611 pixels
  Position = (293.2, 265.2) = 15 11 1.45 5 41 35.5
  Extent = 3.1 (1.9-6.8)", rotation angle = 0
  Source counts = 40.4 +/- 81.1
  Background counts = 6543.5
  Rate = 0.0009 +/- 0.002
  Deleting source due to low Poisson probability