[Wed Mar 14 22:08:38 2012] Detection parameters:
  Position = (292.0, 352.8) = 15 11 1.78 5 47 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 25.4
  Background counts = 278.9
  Rate = 0.003 +/- 0.0006

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 3.97'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.41"
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29.csv
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29.csv
[Thu Mar 15 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Mar 15 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:50:08 2012] Spatial fit model total counts = 3995.200000, observed total counts = 3647.000000
[Thu Mar 15 16:50:08 2012] Offset between fit and detection position for source 35 = 7.757342 pixels
[Thu Mar 15 16:50:08 2012] Warning, changing simple spatial fit ID from 29 to 25
[Thu Mar 15 16:50:08 2012] 3829.250032 total counts/ 3829.250000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 7.757342 pixels
  Position = (296.4, 346.4) = 15 11 0.52 5 47 28.8
  Extent = 16.6" x 16.6", rotation angle = -0
  Source counts = 0.0 +/- 61.9
  Background counts = 3829.2
  Rate = 7e-10 +/- 0.001
  Deleting source due to low Poisson probability