[Wed Mar 14 22:08:37 2012] Detection parameters:
  Position = (286.5, 281.9) = 15 11 3.39 5 42 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1650.1 +/- 158.9
  Background counts = 327.6
  Rate = 0.04 +/- 0.004

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 1.48'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.596
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.17"
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 16:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 15 16:49:38 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 15 16:50:08 2012] Spatial fit model total counts = 5257.020000, observed total counts = 5118.000000
[Thu Mar 15 16:50:08 2012] Offset between fit and detection position for source 3 = 8.173999 pixels
[Thu Mar 15 16:50:08 2012] 5326.462000 total counts/ 4847.080000 bgd. counts: snr = 6.885597
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 8.173999 pixels
  Position = (292.6, 287.4) = 15 11 1.62 5 43 12.2
  Extent = 13.9 (12.9-14.3)", rotation angle = 0
  Source counts = 479.4 +/- 73.0
  Background counts = 4847.1
  Rate = 0.01 +/- 0.002
[Thu Mar 15 16:50:08 2012] Source 3 is offset by 0.154644 and 4.476069 pixels which is larger than
2 X fitted extent = 7.146161 x 2.079223, not incorporating fit results
[Thu Mar 15 16:50:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:08 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:50:08 2012] Source does appear to be extended
[Thu Mar 15 16:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 23:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 23:55:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 23:55:54 2012] Initial guess for spatial extent in simple fitting = 13.87"
[Thu Mar 15 23:55:54 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.901
[Thu Mar 15 23:55:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.87"
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 10:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 16 10:53:46 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Mar 16 10:54:23 2012] Warning, spatial fit 3 centroid is now closest to src. 10
[Fri Mar 16 10:54:23 2012] Spatial fit model total counts = 4607.020000, observed total counts = 4530.000000
[Fri Mar 16 10:54:23 2012] Offset between fit and detection position for source 3 = 2.737953 pixels
[Fri Mar 16 10:54:23 2012] Warning, changing simple spatial fit ID from 3 to 12
[Fri Mar 16 10:54:23 2012] 4656.517000 total counts/ 4380.380000 bgd. counts: snr = 4.172234
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.737953 pixels
  Position = (292.7, 284.7) = 15 11 1.58 5 43 0.3
  Extent = 14.6 (14.6-29.3)", rotation angle = 0
  Source counts = 276.1 +/- 68.2
  Background counts = 4380.4
  Rate = 0.006 +/- 0.001
[Fri Mar 16 10:54:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:23 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:54:23 2012] Source does appear to be extended
[Fri Mar 16 10:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:23 2012] Source is confused with source 10
[Mon Mar 19 02:49:26 2012] XMMSAS src. selection expression = ellipse(25419.034000, 24717.662000, 878.298025, 878.298025, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing source region out to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar 19 02:49:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (242, 234) - (343, 335)
[Mon Mar 19 02:49:26 2012] XMMSAS bgd. selection expression = annulus(25419.034000, 24717.662000, 1463.830042, 2927.660084, X, Y) && !ellipse(27002.104034, 26665.172852, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27697.522583, 27024.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.056800, 22750.213000, 354.684810, 354.684810, 0.000000, X, Y) && !ellipse(24431.151550, 25415.450562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.208100, 22692.485200, 265.327208, 265.327208, 0.000000, X, Y) && !ellipse(24312.612457, 27938.601898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.592000, 24711.972000, 1324.992038, 1324.992038, 0.000000, X, Y) && !ellipse(24576.910000, 24028.374000, 2218.512064, 2218.512064, 0.000000, X, Y) && !ellipse(26660.269012, 23033.337036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28997.478000, 24078.656000, 1303.240038, 1303.240038, 0.000000, X, Y) && !ellipse(26659.087524, 22608.203125, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3.gif
[Mon Mar 19 03:03:40 2012] Mean detx,y = (1958.96, -2493.38) 
[Mon Mar 19 03:03:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 03:03:51 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 03:03:52 2012] Setting source spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 19 03:03:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Mar 19 05:35:30 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:30 2012] Error reading totcts from fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 19 05:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:31 2012] Using photon index=1.80, rate=0.00594, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3.arf
[Mon Mar 19 05:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:31 2012] Updating source flux to 5.5e-14
[Mon Mar 19 05:38:21 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Mon Mar 19 05:38:21 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Mon Mar 19 05:39:35 2012] Reading fit data from xmm0551780301/analysis//spectral/fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_pl.csv
[Mon Mar 19 05:39:35 2012] Spectral fit parameter nH value = 1.12561e+21
[Mon Mar 19 05:39:35 2012] Spectral fit parameter PhoIndex value = 1.76741
[Mon Mar 19 05:39:35 2012] Failed to get F(0.3-8.0) from xmm0551780301/analysis//spectral/fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 05:39:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:39:35 2012] Using Nh = 1.1e+21, photon index=1.77, rate=0.00594, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src3.arf
[Mon Mar 19 05:39:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:39:35 2012] Updating source flux to 6.3e-14