[Wed Mar 14 22:08:38 2012] Detection parameters:
  Position = (307.8, 348.9) = 15 10 57.19 5 47 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.3 +/- 30.7
  Background counts = 333.2
  Rate = 0.005 +/- 0.0007

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 3.72'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.29"
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17.csv
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17.csv
[Thu Mar 15 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Mar 15 16:49:38 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Mar 15 16:50:08 2012] Source 19 is offset by -0.231796 and -1.062140 pixels which is larger than
2 X fitted extent = 0.952653 x 0.952653, not incorporating fit results
[Thu Mar 15 16:50:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:08 2012] Assessing source extent using major
[Thu Mar 15 16:50:08 2012] Source does appear to be extended
[Thu Mar 15 16:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:08 2012] Source is confused with source 34
[Thu Mar 15 23:55:54 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 23:55:54 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Thu Mar 15 23:55:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Thu Mar 15 23:55:54 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.29"
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16.csv
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16.csv
[Fri Mar 16 10:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:53:47 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Mar 16 10:53:47 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Mar 16 10:53:47 2012] Fit fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Mar 16 10:54:23 2012] Source 19 is offset by -7.099800 and 5.106841 pixels which is larger than
2 X fitted extent = 0.953963 x 0.953963, not incorporating fit results
[Fri Mar 16 10:54:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:23 2012] Assessing source extent using major
[Fri Mar 16 10:54:23 2012] Source does appear to be extended
[Fri Mar 16 10:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 02:49:26 2012] XMMSAS src. selection expression = ellipse(26730.441437, 30303.285156, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing source region out to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19_src.reg
[Mon Mar 19 02:49:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (270, 311) - (345, 386)
[Mon Mar 19 02:49:26 2012] XMMSAS bgd. selection expression = annulus(26730.441437, 30303.285156, 1087.500000, 2175.000000, X, Y) && !ellipse(27002.104034, 26665.172852, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24312.612457, 27938.601898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.262909, 28555.062531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25700.637878, 32202.032013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.131897, 30407.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.381958, 30705.676086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24342.603668, 29663.502747, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19.gif
[Mon Mar 19 03:19:32 2012] Mean detx,y = (-1233.51, 2041.02) 
[Mon Mar 19 03:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 03:19:43 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 03:19:43 2012] Setting source spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Mar 19 03:19:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Mar 19 05:25:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 05:25:31 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:31 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:31 2012] Error reading totcts from fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Mar 19 05:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:31 2012] Using photon index=1.80, rate=0.00532, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src19.arf
[Mon Mar 19 05:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:31 2012] Updating source flux to 5.2e-14
[Mon Mar 19 05:38:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting