[Wed Mar 14 22:08:37 2012] Detection parameters:
  Position = (318.9, 311.2) = 15 10 53.95 5 44 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8801.7 +/- 122.8
  Background counts = 547.0
  Rate = 0.2 +/- 0.003

[Wed Mar 14 22:08:39 2012] Off-axis axis estimate = 1.75'
[Thu Mar 15 03:46:28 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 03:46:28 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Mar 15 03:46:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.737
[Thu Mar 15 03:46:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30"
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2.csv
[Thu Mar 15 16:49:37 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Mar 15 16:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2.csv
[Thu Mar 15 16:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Mar 15 16:49:38 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Mar 15 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Mar 15 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:50:08 2012] Spatial fit model total counts = 74117.000000, observed total counts = 65940.000000
[Thu Mar 15 16:50:08 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 16:50:08 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:08 2012] Assessing source extent using major
[Thu Mar 15 16:50:08 2012] Source does appear to be extended
[Thu Mar 15 16:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 23:55:54 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 23:55:54 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Mar 15 23:55:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.737
[Thu Mar 15 23:55:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.30"
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2.csv
[Fri Mar 16 10:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Mar 16 10:53:46 2012] fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar 16 10:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Mar 16 10:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:23 2012] Spatial fit model total counts = 45131.400000, observed total counts = 65940.000000
[Fri Mar 16 10:54:23 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 10:54:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:23 2012] Assessing source extent using major
[Fri Mar 16 10:54:23 2012] Source does appear to be extended
[Fri Mar 16 10:54:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 02:49:26 2012] Counts = 8801.718750, rescaling region sizes by 2.000000
[Mon Mar 19 02:49:26 2012] XMMSAS src. selection expression = ellipse(27697.522583, 27024.419556, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing source region out to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 19 02:49:26 2012] Extracting stamp from image fullrun_mos2_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (244, 236) - (394, 386)
[Mon Mar 19 02:49:26 2012] XMMSAS bgd. selection expression = annulus(27697.522583, 27024.419556, 4350.000000, 8700.000000, X, Y) && !ellipse(27002.104034, 26665.172852, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25419.034000, 24717.662000, 1171.064034, 1171.064034, 0.000000, X, Y) && !ellipse(23896.056800, 22750.213000, 354.684810, 354.684810, 0.000000, X, Y) && !ellipse(24431.151550, 25415.450562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32620.013275, 30856.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.208100, 22692.485200, 265.327208, 265.327208, 0.000000, X, Y) && !ellipse(24312.612457, 27938.601898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.592000, 24711.972000, 1324.992038, 1324.992038, 0.000000, X, Y) && !ellipse(24066.262909, 28555.062531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24576.910000, 24028.374000, 2218.512064, 2218.512064, 0.000000, X, Y) && !ellipse(26660.269012, 23033.337036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28997.478000, 24078.656000, 1303.240038, 1303.240038, 0.000000, X, Y) && !ellipse(25700.637878, 32202.032013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.441437, 30303.285156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.131897, 30407.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30425.850000, 28263.092000, 1322.704038, 1322.704038, 0.000000, X, Y) && !ellipse(26437.381958, 30705.676086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.087524, 22608.203125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30338.960785, 25587.419464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.989685, 24061.807770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24342.603668, 29663.502747, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 02:49:26 2012] Writing fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1.gif
[Mon Mar 19 03:00:07 2012] Mean detx,y = (-479.02, -1287.05) 
[Mon Mar 19 03:00:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 03:03:32 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 03:03:33 2012] Setting source spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 03:03:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 19 03:23:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 03:23:39 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:30 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:30 2012] Error reading totcts from fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 05:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:31 2012] Using photon index=1.80, rate=0.205, arf fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 05:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:31 2012] Updating source flux to 2e-12
[Mon Mar 19 05:38:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Mar 19 05:39:35 2012] xmm0551780301/analysis//spectral/fullrun_mos2_xmm0551780301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete