[Wed Mar 14 22:08:04 2012] Detection parameters:
  Position = (312.7, 348.5) = 15 10 55.76 5 47 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.9 +/- 33.6
  Background counts = 314.2
  Rate = 0.009 +/- 0.0009

[Wed Mar 14 22:08:06 2012] Off-axis axis estimate = 3.78'
[Thu Mar 15 01:48:24 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:48:24 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Mar 15 01:48:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.903
[Thu Mar 15 01:48:24 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.32"
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11.csv
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Mar 15 03:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11.csv
[Thu Mar 15 03:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Mar 15 03:46:27 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Mar 15 16:50:00 2012] Source 9 is offset by -3.353979 and 7.168955 pixels which is larger than
2 X fitted extent = 3.980731 x 3.980731, not incorporating fit results
[Thu Mar 15 16:50:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:00 2012] Assessing source extent using major
[Thu Mar 15 16:50:00 2012] Source does appear to be extended
[Thu Mar 15 16:50:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:00 2012] Source is confused with source 6
[Thu Mar 15 22:07:47 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:07:47 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Mar 15 22:07:47 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.903
[Thu Mar 15 22:07:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.32"
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Mar 15 23:55:54 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Mar 15 23:55:54 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Mar 16 10:54:14 2012] Spatial fit model total counts = 5105.530000, observed total counts = 5063.000000
[Fri Mar 16 10:54:14 2012] Offset between fit and detection position for source 9 = 5.693855 pixels
[Fri Mar 16 10:54:14 2012] 4423.394000 total counts/ 3897.250000 bgd. counts: snr = 8.428019
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 5.693855 pixels
  Position = (311.0, 354.0) = 15 10 56.25 5 48 1.7
  Extent = 16.6 (16.6-33.3)", rotation angle = 0
  Source counts = 526.1 +/- 66.5
  Background counts = 3897.2
  Rate = 0.01 +/- 0.001
[Fri Mar 16 10:54:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:14 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:54:14 2012] Source does appear to be extended
[Fri Mar 16 10:54:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 21:46:45 2012] XMMSAS src. selection expression = ellipse(27011.471200, 30746.062000, 997.980029, 997.980029, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing source region out to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9_src.reg
[Fri Mar 16 21:46:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (254, 297) - (368, 411)
[Fri Mar 16 21:46:45 2012] XMMSAS bgd. selection expression = annulus(27011.471200, 30746.062000, 1663.300048, 3326.600096, X, Y) && !ellipse(26999.807434, 26662.430206, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26731.590000, 29317.408000, 1298.184037, 1298.184037, 0.000000, X, Y) && !ellipse(26025.678000, 30047.568000, 1338.544039, 1338.544039, 0.000000, X, Y) && !ellipse(27653.422546, 30502.935394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.129425, 32279.131409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.690063, 29449.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.168000, 30699.184000, 2596.368075, 2596.368075, 0.000000, X, Y) && !ellipse(25397.180000, 30882.666000, 2405.384069, 2405.384069, 0.000000, X, Y) && !ellipse(24626.644012, 30495.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.300000, 30480.284000, 2395.872069, 2395.872069, 0.000000, X, Y) && !ellipse(27833.782000, 29477.920000, 1197.936034, 1197.936034, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9.gif
[Fri Mar 16 21:58:10 2012] Mean detx,y = (2507.78, 1460.83) 
[Fri Mar 16 21:58:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 21:58:22 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 21:58:22 2012] Setting source spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Mar 16 21:58:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 19 05:35:29 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:29 2012] Error reading totcts from fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 19 05:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:29 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src9.arf
[Mon Mar 19 05:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:29 2012] Updating source flux to 1.1e-13
[Mon Mar 19 05:35:33 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon Mar 19 05:35:33 2012] Flag c found in src. 9 procflags, skipping spectral fitting