[Wed Mar 14 22:08:04 2012] Detection parameters:
  Position = (375.4, 356.7) = 15 10 37.50 5 48 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 405.7 +/- 26.3
  Background counts = 101.7
  Rate = 0.01 +/- 0.0008

[Wed Mar 14 22:08:06 2012] Off-axis axis estimate = 7.00'
[Thu Mar 15 01:48:24 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:48:24 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Mar 15 01:48:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.646
[Thu Mar 15 01:48:24 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.93"
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Mar 15 03:46:26 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Mar 15 03:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Mar 15 03:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Mar 15 03:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:50:00 2012] Source 8 is offset by -5.885473 and 7.024881 pixels which is larger than
2 X fitted extent = 0.915260 x 0.915260, not incorporating fit results
[Thu Mar 15 16:50:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:00 2012] Assessing source extent using major
[Thu Mar 15 16:50:00 2012] Source does appear to be extended
[Thu Mar 15 16:50:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:07:47 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:07:47 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Mar 15 22:07:47 2012] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.646
[Thu Mar 15 22:07:47 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.93"
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:14 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.876105 pixels away
[Fri Mar 16 10:54:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:14 2012] Assessing source extent using major
[Fri Mar 16 10:54:14 2012] Source does appear to be extended
[Fri Mar 16 10:54:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 21:46:45 2012] XMMSAS src. selection expression = ellipse(32607.385956, 30984.642670, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing source region out to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8_src.reg
[Fri Mar 16 21:46:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (338, 319) - (413, 394)
[Fri Mar 16 21:46:45 2012] XMMSAS bgd. selection expression = annulus(32607.385956, 30984.642670, 1087.500000, 2175.000000, X, Y) && !ellipse(28539.300000, 30480.284000, 2395.872069, 2395.872069, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8.gif
[Fri Mar 16 21:56:38 2012] Mean detx,y = (633.34, 6828.78) 
[Fri Mar 16 21:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 21:57:09 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 21:57:10 2012] Setting source spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Mar 16 21:57:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Mar 16 23:00:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 23:00:14 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:29 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:29 2012] Error reading totcts from fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Mar 19 05:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:29 2012] Using photon index=1.80, rate=0.0117, arf fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src8.arf
[Mon Mar 19 05:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:29 2012] Updating source flux to 1.7e-13
[Mon Mar 19 05:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting