[Wed Mar 14 22:08:04 2012] Detection parameters:
  Position = (304.4, 344.5) = 15 10 58.18 5 47 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 497.7 +/- 42.3
  Background counts = 331.9
  Rate = 0.01 +/- 0.001

[Wed Mar 14 22:08:06 2012] Off-axis axis estimate = 3.37'
[Thu Mar 15 01:48:24 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:48:24 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Thu Mar 15 01:48:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.804
[Thu Mar 15 01:48:24 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.11"
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4.csv
[Thu Mar 15 03:46:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar 15 03:46:27 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Mar 15 16:50:00 2012] Spatial fit model total counts = 6659.780000, observed total counts = 6537.000000
[Thu Mar 15 16:50:00 2012] Offset between fit and detection position for source 5 = 7.790342 pixels
[Thu Mar 15 16:50:00 2012] 6463.029000 total counts/ 5850.290000 bgd. counts: snr = 8.011002
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 7.790342 pixels
  Position = (307.8, 337.5) = 15 10 57.19 5 46 50.3
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 612.7 +/- 80.4
  Background counts = 5850.3
  Rate = 0.01 +/- 0.002
[Thu Mar 15 16:50:00 2012] Source 5 is offset by 5.178000 and -0.998598 pixels which is larger than
2 X fitted extent = 4.369715 x 1.386189, not incorporating fit results
[Thu Mar 15 16:50:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:00 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:50:00 2012] Source does appear to be extended
[Thu Mar 15 16:50:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:07:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:07:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 22:07:47 2012] Initial guess for spatial extent in simple fitting = 16.23"
[Thu Mar 15 22:07:47 2012] source mask rpix=3.7, npix_max = 71, mask sum = 70, frac = 0.978
[Thu Mar 15 22:07:47 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 16.23"
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Mar 15 23:55:53 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Mar 16 10:54:14 2012] Warning, spatial fit 4 centroid is now closest to src. 17
[Fri Mar 16 10:54:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:14 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:54:14 2012] Source does appear to be extended
[Fri Mar 16 10:54:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:54:14 2012] Source is confused with source 17
[Fri Mar 16 21:46:45 2012] XMMSAS src. selection expression = ellipse(26731.590000, 29317.408000, 973.638028, 973.638028, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing source region out to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5_src.reg
[Fri Mar 16 21:46:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (252, 282) - (364, 393)
[Fri Mar 16 21:46:45 2012] XMMSAS bgd. selection expression = annulus(26731.590000, 29317.408000, 1622.730047, 3245.460093, X, Y) && !ellipse(26999.807434, 26662.430206, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26025.678000, 30047.568000, 1338.544039, 1338.544039, 0.000000, X, Y) && !ellipse(27653.422546, 30502.935394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.129425, 32279.131409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27011.471200, 30746.062000, 1330.640038, 1330.640038, 0.000000, X, Y) && !ellipse(24989.690063, 29449.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.168000, 30699.184000, 2596.368075, 2596.368075, 0.000000, X, Y) && !ellipse(24333.993408, 25371.929321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25397.180000, 30882.666000, 2405.384069, 2405.384069, 0.000000, X, Y) && !ellipse(24626.644012, 30495.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.300000, 30480.284000, 2395.872069, 2395.872069, 0.000000, X, Y) && !ellipse(27833.782000, 29477.920000, 1197.936034, 1197.936034, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5.gif
[Fri Mar 16 21:55:58 2012] Mean detx,y = (1194.26, 641.58) 
[Fri Mar 16 21:55:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 21:56:08 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 21:56:09 2012] Setting source spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 16 21:56:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar 19 05:35:28 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:28 2012] Error reading totcts from fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 19 05:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:29 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src5.arf
[Mon Mar 19 05:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:29 2012] Updating source flux to 1.2e-13
[Mon Mar 19 05:35:33 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Mon Mar 19 05:35:33 2012] Flag c found in src. 5 procflags, skipping spectral fitting