[Wed Mar 14 22:08:04 2012] Detection parameters:
  Position = (294.4, 340.6) = 15 11 1.10 5 46 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.3 +/- 37.6
  Background counts = 329.7
  Rate = 0.01 +/- 0.001

[Wed Mar 14 22:08:06 2012] Off-axis axis estimate = 3.07'
[Thu Mar 15 01:48:24 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:48:24 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Thu Mar 15 01:48:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Thu Mar 15 01:48:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.96"
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 03:46:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 15 03:46:27 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar 15 16:50:00 2012] Source 4 is offset by -3.439862 and 5.840433 pixels which is larger than
2 X fitted extent = 2.943462 x 2.943462, not incorporating fit results
[Thu Mar 15 16:50:00 2012] Source 4 is offset by -4.937655 and -3.107084 pixels which is larger than
2 X fitted extent = 1.415926 x 1.415926, not incorporating fit results
[Thu Mar 15 16:50:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:00 2012] Assessing source extent using major
[Thu Mar 15 16:50:00 2012] Source does appear to be extended
[Thu Mar 15 16:50:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:50:00 2012] Source is confused with source 10
[Thu Mar 15 16:50:00 2012] Source is confused with source 11
[Thu Mar 15 22:07:47 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:07:47 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Thu Mar 15 22:07:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Thu Mar 15 22:07:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.96"
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src5.ximg exists
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Mar 15 23:55:53 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Mar 15 23:55:53 2012] Fit fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Mar 16 10:54:14 2012] Source 4 is offset by -3.406712 and 5.807836 pixels which is larger than
2 X fitted extent = 2.881237 x 2.881237, not incorporating fit results
[Fri Mar 16 10:54:14 2012] Spatial fit model total counts = 4009.610000, observed total counts = 3964.000000
[Fri Mar 16 10:54:14 2012] Offset between fit and detection position for source 4 = 7.551816 pixels
[Fri Mar 16 10:54:14 2012] Warning, changing simple spatial fit ID from 5 to 17
[Fri Mar 16 10:54:14 2012] 3944.068000 total counts/ 3723.730000 bgd. counts: snr = 3.610774
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 7.551816 pixels
  Position = (299.7, 345.9) = 15 10 59.55 5 47 26.8
  Extent = 16.7 (16.7-16.8)", rotation angle = 0
  Source counts = 220.3 +/- 62.8
  Background counts = 3723.7
  Rate = 0.005 +/- 0.001
[Fri Mar 16 10:54:14 2012] Source 4 is offset by 4.841057 and 2.240483 pixels which is larger than
2 X fitted extent = 8.233288 x 1.423890, not incorporating fit results
[Fri Mar 16 10:54:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:14 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 10:54:14 2012] Source does appear to be extended
[Fri Mar 16 10:54:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 21:46:45 2012] XMMSAS src. selection expression = ellipse(26025.678000, 30047.568000, 1003.908029, 1003.908029, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing source region out to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 21:46:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (242, 288) - (357, 404)
[Fri Mar 16 21:46:45 2012] XMMSAS bgd. selection expression = annulus(26025.678000, 30047.568000, 1673.180048, 3346.360096, X, Y) && !ellipse(26999.807434, 26662.430206, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26731.590000, 29317.408000, 1298.184037, 1298.184037, 0.000000, X, Y) && !ellipse(27653.422546, 30502.935394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25707.129425, 32279.131409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27011.471200, 30746.062000, 1330.640038, 1330.640038, 0.000000, X, Y) && !ellipse(24989.690063, 29449.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.168000, 30699.184000, 2596.368075, 2596.368075, 0.000000, X, Y) && !ellipse(25397.180000, 30882.666000, 2405.384069, 2405.384069, 0.000000, X, Y) && !ellipse(24626.644012, 30495.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.300000, 30480.284000, 2395.872069, 2395.872069, 0.000000, X, Y) && !ellipse(27833.782000, 29477.920000, 1197.936034, 1197.936034, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 21:56:17 2012] Mean detx,y = (2209.43, 330.93) 
[Fri Mar 16 21:56:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 21:56:28 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 21:56:29 2012] Setting source spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 21:56:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Mar 19 05:35:28 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:29 2012] Error reading totcts from fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Mar 19 05:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:29 2012] Using photon index=1.80, rate=0.00474, arf fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src4.arf
[Mon Mar 19 05:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:29 2012] Updating source flux to 4.4e-14
[Mon Mar 19 05:35:33 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Mon Mar 19 05:35:33 2012] Flag c found in src. 4 procflags, skipping spectral fitting