[Wed Mar 14 22:08:04 2012] Detection parameters:
  Position = (310.9, 307.0) = 15 10 56.29 5 44 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35596.9 +/- 231.7
  Background counts = 574.7
  Rate = 0.8 +/- 0.005

[Wed Mar 14 22:08:06 2012] Off-axis axis estimate = 1.10'
[Thu Mar 15 01:48:24 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 01:48:24 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Thu Mar 15 01:48:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Thu Mar 15 01:48:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.98"
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 03:46:26 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 03:46:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 03:46:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 03:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 15 03:46:27 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 03:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar 15 03:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:50:00 2012] Spatial fit model total counts = 91412.100000, observed total counts = 102569.000000
[Thu Mar 15 16:50:00 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 16:50:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:50:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:50:00 2012] Assessing source extent using major
[Thu Mar 15 16:50:00 2012] Source does appear to be extended
[Thu Mar 15 16:50:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:07:47 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:07:47 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Thu Mar 15 22:07:47 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Thu Mar 15 22:07:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.98"
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Mar 15 23:55:53 2012] fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 23:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Mar 15 23:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551780301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:54:14 2012] Spatial fit model total counts = 91442.800000, observed total counts = 102569.000000
[Fri Mar 16 10:54:14 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 10:54:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 10:54:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 10:54:14 2012] Assessing source extent using major
[Fri Mar 16 10:54:14 2012] Source does appear to be extended
[Fri Mar 16 10:54:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 21:46:45 2012] Counts = 35596.890625, rescaling region sizes by 3.000000
[Fri Mar 16 21:46:45 2012] XMMSAS src. selection expression = ellipse(26999.807434, 26662.430206, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing source region out to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 21:46:45 2012] Extracting stamp from image fullrun_mos1_xmm0551780301_pi300-10000_cl_sm2.00.img.gz, (198, 195) - (423, 420)
[Fri Mar 16 21:46:45 2012] XMMSAS bgd. selection expression = annulus(26999.807434, 26662.430206, 9787.500000, 19575.000000, X, Y) && !ellipse(23905.695400, 22734.624240, 360.020810, 360.020810, 0.000000, X, Y) && !ellipse(15762.329559, 28037.209686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.590000, 29317.408000, 1298.184037, 1298.184037, 0.000000, X, Y) && !ellipse(26025.678000, 30047.568000, 1338.544039, 1338.544039, 0.000000, X, Y) && !ellipse(32607.385956, 30984.642670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.422546, 30502.935394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.795800, 22670.934600, 405.834412, 265.061608, 350.248619, X, Y) && !ellipse(25707.129425, 32279.131409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27011.471200, 30746.062000, 1330.640038, 1330.640038, 0.000000, X, Y) && !ellipse(24989.690063, 29449.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33260.183319, 38128.362732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.168000, 30699.184000, 2596.368075, 2596.368075, 0.000000, X, Y) && !ellipse(18771.689774, 21880.346756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24333.993408, 25371.929321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25397.180000, 30882.666000, 2405.384069, 2405.384069, 0.000000, X, Y) && !ellipse(26081.732819, 23307.936096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24880.666595, 24347.738495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.644012, 30495.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.300000, 30480.284000, 2395.872069, 2395.872069, 0.000000, X, Y) && !ellipse(27833.782000, 29477.920000, 1197.936034, 1197.936034, 0.000000, X, Y)
[Fri Mar 16 21:46:45 2012] Writing fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 21:47:08 2012] Mean detx,y = (-1099.18, -47.20) 
[Fri Mar 16 21:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 21:55:18 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 21:55:18 2012] Setting source spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 21:55:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 22:36:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 22:36:24 2012] rmf not generated due to insufficient counts
[Mon Mar 19 05:35:28 2012] Updating aperture counts using extracted products
[Mon Mar 19 05:35:28 2012] Error reading totcts from fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 05:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 05:35:29 2012] Using photon index=1.80, rate=0.794, arf fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 05:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 05:35:29 2012] Updating source flux to 6.7e-12
[Mon Mar 19 05:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Mar 19 05:38:21 2012] xmm0551780301/analysis//spectral/fullrun_mos1_xmm0551780301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete