[Sat Jun 23 10:52:43 2012] Detection parameters:
  Position = (381.8, 327.4) = 6 9 0.83 48 4 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.4 +/- 16.8
  Background counts = 103.0
  Rate = 0.004 +/- 0.001

[Sat Jun 23 10:52:44 2012] Off-axis axis estimate = 6.40'
[Sat Jun 23 12:03:35 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:03:35 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Jun 23 12:03:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Sat Jun 23 12:03:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.63"
[Sat Jun 23 12:28:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 23 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9.csv
[Sat Jun 23 12:28:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 23 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9.csv
[Sat Jun 23 12:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:28:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 23 12:28:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 23 12:28:41 2012] Fit fullrun_mos2_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jun 23 12:28:47 2012] Source 4 is offset by -8.987606 and -1.901874 pixels which is larger than
2 X fitted extent = 2.875798 x 2.875798, not incorporating fit results
[Sat Jun 23 12:28:47 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:28:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:28:47 2012] Assessing source extent using major
[Sat Jun 23 12:28:47 2012] Source does appear to be extended
[Sat Jun 23 12:28:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 13:45:11 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:45:11 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Jun 23 13:45:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Sat Jun 23 13:45:11 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.63"
[Sat Jun 23 14:16:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun 23 14:16:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9.csv
[Sat Jun 23 14:16:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun 23 14:16:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9.csv
[Sat Jun 23 14:16:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:16:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun 23 14:16:41 2012] fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun 23 14:16:41 2012] Fit fullrun_mos2_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Jun 23 14:16:47 2012] Spatial fit model total counts = 997.514000, observed total counts = 945.000000
[Sat Jun 23 14:16:47 2012] Offset between fit and detection position for source 4 = 1.060628 pixels
[Sat Jun 23 14:16:47 2012] 987.987200 total counts/ 920.254000 bgd. counts: snr = 2.232789
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.060628 pixels
  Position = (380.8, 327.6) = 6 9 1.28 48 4 48.0
  Extent = 8.5 (5.7-14.2)", rotation angle = 0
  Source counts = 67.7 +/- 31.4
  Background counts = 920.3
  Rate = 0.004 +/- 0.002
[Sat Jun 23 14:16:47 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:16:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:16:47 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:16:47 2012] Source does appear to be extended
[Sat Jun 23 14:16:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:29:02 2012] XMMSAS src. selection expression = ellipse(33078.544600, 28448.593000, 512.083215, 512.083215, 0.000000, X, Y)
[Sat Jun 23 14:29:02 2012] Writing source region out to fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 23 14:29:02 2012] Extracting stamp from image fullrun_mos2_xmm0551761001_pi300-10000_cl_sm2.00.img.gz, (351, 298) - (410, 357)
[Sat Jun 23 14:29:02 2012] XMMSAS bgd. selection expression = annulus(33078.544600, 28448.593000, 853.472025, 1706.944049, X, Y)
[Sat Jun 23 14:29:02 2012] Writing fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4.gif
[Sat Jun 23 14:31:01 2012] Mean detx,y = (-6155.66, 157.32) 
[Sat Jun 23 14:31:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 14:31:18 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 14:31:18 2012] Setting source spectrum file to fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 14:31:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 23 14:35:06 2012] Not generating rmf since there are only 67 counts
[Sat Jun 23 14:35:06 2012] rmf not generated due to insufficient counts
[Sat Jun 23 14:40:31 2012] Updating aperture counts using extracted products
[Sat Jun 23 14:40:31 2012] Error reading totcts from fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 14:40:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 14:40:31 2012] Using photon index=1.80, rate=0.00407, arf fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4.arf
[Sat Jun 23 14:40:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 14:40:31 2012] Updating source flux to 5.6e-14
[Sat Jun 23 14:41:41 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Sat Jun 23 14:41:41 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 23 14:42:06 2012] xmm0551761001/analysis//spectral/fullrun_mos2_xmm0551761001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete