[Sat Jun 23 10:52:12 2012] Detection parameters:
  Position = (236.3, 490.0) = 6 10 4.10 48 16 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.0 +/- 18.7
  Background counts = 67.5
  Rate = 0.005 +/- 0.0009

[Sat Jun 23 10:52:13 2012] Off-axis axis estimate = 14.60'
[Sat Jun 23 11:06:02 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:06:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 11:06:02 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Sat Jun 23 11:06:02 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Sat Jun 23 11:06:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.73"
[Sat Jun 23 12:03:34 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 12:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 12:03:34 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 12:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 12:03:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:03:35 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 12:03:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 12:03:35 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 12:03:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 12:03:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551761001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:28:45 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Sat Jun 23 12:28:45 2012] Spatial fit model total counts = 1303.430000, observed total counts = 1303.000000
[Sat Jun 23 12:28:45 2012] Offset between fit and detection position for source 3 = 2.798229 pixels
[Sat Jun 23 12:28:45 2012] Warning, changing simple spatial fit ID from 1 to 4
[Sat Jun 23 12:28:45 2012] 1150.695000 total counts/ 953.645000 bgd. counts: snr = 6.380917
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.798229 pixels
  Position = (237.9, 487.7) = 6 10 3.41 48 16 24.6
  Extent = 20.6 (9.1-27.0)", rotation angle = 0
  Source counts = 197.1 +/- 33.9
  Background counts = 953.6
  Rate = 0.01 +/- 0.002
[Sat Jun 23 12:28:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:28:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:28:45 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:28:45 2012] Source does appear to be extended
[Sat Jun 23 12:28:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:28:45 2012] Source is confused with source 2
[Sat Jun 23 12:28:45 2012] Source is confused with source 7
[Sat Jun 23 12:28:45 2012] Source is confused with source 6
[Sat Jun 23 12:28:45 2012] Source is confused with source 5
[Sat Jun 23 12:30:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:30:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 12:30:53 2012] Initial guess for spatial extent in simple fitting = 20.62"
[Sat Jun 23 12:30:53 2012] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.002
[Sat Jun 23 12:30:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 20.62"
[Sat Jun 23 13:45:11 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 13:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:45:11 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 13:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:45:11 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 13:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:45:11 2012] fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 13:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551761001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:16:45 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Sat Jun 23 14:16:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:16:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:16:45 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:16:45 2012] Source does appear to be extended
[Sat Jun 23 14:16:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:17:51 2012] XMMSAS src. selection expression = ellipse(20647.080000, 42377.948000, 1236.948036, 1236.948036, 0.000000, X, Y)
[Sat Jun 23 14:17:51 2012] Writing source region out to fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 23 14:17:51 2012] Extracting stamp from image fullrun_mos1_xmm0551761001_pi300-10000_cl_sm2.00.img.gz, (167, 417) - (309, 559)
[Sat Jun 23 14:17:51 2012] XMMSAS bgd. selection expression = annulus(20647.080000, 42377.948000, 2061.580059, 4123.160119, X, Y) && !ellipse(19579.766525, 42406.953064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20463.577200, 41517.330000, 1904.904055, 1904.904055, 0.000000, X, Y) && !ellipse(21375.745163, 43435.726471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22612.581268, 43712.598236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20657.922150, 42017.749664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19865.438385, 42828.850494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.739487, 41138.106598, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 14:17:51 2012] Writing fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3.gif
[Sat Jun 23 14:17:56 2012] Mean detx,y = (15452.14, -4820.13) 
[Sat Jun 23 14:17:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 14:18:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 14:18:23 2012] Setting source spectrum file to fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 14:18:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 23 14:40:30 2012] Updating aperture counts using extracted products
[Sat Jun 23 14:40:30 2012] Error reading totcts from fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 14:40:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 14:40:31 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 14:40:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 14:40:31 2012] Updating source flux to 2.9e-13
[Sat Jun 23 14:40:32 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat Jun 23 14:41:41 2012] xmm0551761001/analysis//spectral/fullrun_mos1_xmm0551761001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete